Table of Contents
Advertisement
4
Setup and installation
CAUTION
Changes to device
Do not make any mechanical or electric changes to the device.
EIZO GmbH will not be held liable if changes are made to the device.
4.1
Installation site
Note the following conditions at the installation location.
NOTICE
Device connections accessible at all times
The monitor does not have a power switch. The monitor's power supply connection is the
only way to disconnect the monitor from the 24 V power supply.
• The 24 V power supply connection or the cable to the external line power has to be in‐
stalled such that it is accessible to the user at all times.
• If this is not possible, a separator accessible to the user must be designed and installed
in accordance with applicable safety standards.
NOTICE
Condensation
If the device is brought into a warm environment from a cold one, condensation may form
in the device. This could result in a short circuit when switching on the device, damaging it.
• Wait until the condensed water has evaporated, including that inside the device, before
you switch it on. This can take several hours.
Avoid dusty environments
The monitor is intended for use in the clean environment of medical technology.
•
Protect the monitor from dust, for example through appropriate building measures at the
installation location.
•
During transport, use the original packaging.
Maintain the permissible ambient temperature
The ambient temperature must be in a range of +5 °C - +40 °C.
Avoid reflections on the screen
The monitor has an anti-glare surface which is only effective if the screen is clean and
grease-free.
•
Comply with the specifications for Cleaning.
RadiForce EX270W
Instruction for Use, 06/2014
Setup and installation
4.1 Installation site
15
Advertisement
Table of Contents
