Fan Only Replacement Kit 26A396; Tools Required; Remove The Fan - Graco E-Flo EM0011 Repair Parts

Fan Only Replacement Kit 26A396

Tools Required

• 3 mm hex wrench
• 6mm hex wrench
• Flathead screwdriver
• Snap ring pliers
• Torque wrench 20 ft-lb (27 N•m)

Remove the Fan

1. Follow the instructions in Prepare for Repair,
page 16.
2. Using a 3 mm hex wrench, remove the three fan
cover screws (56) and then remove the cover (55).
F . 11: Fan Cover
IG
55 Fan Cover
56 Screws
3A4801G
3. Using a flathead screwdriver, remove the retaining
clip (54).
F . 12: Fan
IG
53 Fan
54 Retaining clip
4. Pull the fan (53) to remove it. It is a pressed-on fit.
Be careful not to damage the seal (26).
Fan Only Replacement Kit 26A396
23