Fan Only Replacement Kit 26A396; Tools Required; Remove The Fan; Install The Fan - Graco E-Flo EM0011 Repair Parts

Fan Only Replacement Kit 26A396

Fan Only Replacement Kit 26A396

Tools Required

• 3 mm hex wrench
• Flathead screwdriver

Remove the Fan

1. Follow the instructions in Prepare for Repair,
page 16.
2. Using a 3 mm hex wrench, remove the three fan
cover screws (56) and then remove the cover (55).
F . 5: Fan Cover
IG
55 Fan Cover
56 Screws
20
3. Using a flathead screwdriver, remove the retaining
clip (54).
F . 6: Fan
IG
53 Fan
54 Retaining clip
4. Pull the fan (53) to remove it. It is a pressed-on fit.
Be careful not to damage the seal (26).

Install the Fan

1. Press the fan (53) onto the fan shaft (49).
2. Attach the retaining clip (54) into the groove in the
fan shaft, lining up the clearance flat of the shaft
with the clip ends.
3. Using a 3 mm hex wrench, secure the fan cover (55)
with the three screws (56).
3A4801G