Remove The 1St Stage Gear - Graco E-Flo EM0011 Repair Parts

4. Using a flathead screwdriver, remove the retaining
clip (54).
F . 18: Fan
IG
53 Fan
54 Retaining clip
5. Pull the fan (53) to remove it. It is a pressed-on fit.
Be careful not to damage the seal (26).
6. Remove the eight 6 mm hex screws (24) and
washers (43) from the gear cover.
3A4801G
Gear and Output Shaft Replacement Kits: 26A401 (series A/B), 26A398 (series C), and 26A399
7. The gear cover is mounted on two dowels. Pull the
cover straight out to remove it.
F . 19: Gear Cover
IG
2 Gear cover
24 Hex screws
43 Washer

Remove the 1st Stage Gear

Pull out the 1st stage gear (11). You might need to push
the 2nd stage gear (10) aside to release the 1st stage
gear.
27