Gear And Output Shaft Replacement Kits: 26A401 (Series A/B), 26A398 (Series C), And 26A399; Tools Required; Remove The Fan And Gear Cover - Graco E-Flo EM0011 Repair Parts

Gear and Output Shaft Replacement Kits: 26A401 (series A/B), 26A398 (series C), and 26A399

Gear and Output Shaft Replacement Kits: 26A401
(series A/B), 26A398 (series C), and 26A399

Tools Required

• 3 mm hex wrench
• 4 mm hex wrench
• 6 mm hex wrench
• 1/4 inch (10 mm) drive socket wrench
• Phillips screwdriver (#1)
• 2 inch wrench
• M5 socket wrench
• Torque wrenches
- 80 ft-lb (108 N•m)
- 150 in-lb (17 N•m)
• Blue (medium) thread locking compound
• Grease
26

Remove the Fan and Gear Cover

1. Follow the instructions in Prepare for Repair,
page 16.
2. Using a 2 inch wrench, loosen the gear jam nuts
(46) on the outside of the gear cover for later
removal.
See Parts — Gear Box, page 10
3. Using a 3 mm hex wrench, remove the three fan
cover screws (56) and then remove the cover (55).
F . 17: Fan Cover
IG
55 Fan Cover
56 Screws
.
3A4801G