Reattach The Pump Lower - Graco E-Flo EM0011 Repair Parts

c. The motor pauses for a few seconds.
d. If the encoder calibration is successful, the
motor proceeds to calibrate the stroke
changeover position, which is ten quick cycles.
e. When calibration has successfully completed,
the DIP switch position are saved.
NOTE: Do not return the DIP switches to the
original position unless you want to cancel the
calibration.
3A4801G
f. The motor resets itself.
3. Ensure that the automatic calibration process is
complete before you continue.

Reattach the Pump Lower

1. Jog the output shaft on the pump lower and
reconnect the coupling nut.
2. Torque to the proper level according to the
appropriate pump manual.
Encoder Replacement Kit 24U938
43