Fan Coupler Replacement Kit 16J463; Tools Required; Remove The Gear Cover - Graco E-Flo EM0011 Repair Parts

Fan Coupler Replacement Kit 16J463

Tools Required

• 3 mm hex wrench
• 6 mm hex wrench
• Torque wrench 20 ft-lb (27 N•m)

Remove the Gear Cover

1. Follow the instructions in Prepare for Repair,
page 16.
2. Using a 3 mm hex wrench, remove the three fan
cover screws (56) and then remove the cover (55).
F . 7: Fan Cover
IG
55 Fan Cover
56 Screws
3A4801G
Fan Coupler Replacement Kit 16J463
3. Remove the eight 6 mm hex screws (24) and
washers (43) from the gear cover (2).
4. The gear cover is mounted on two dowels. Pull the
cover straight out to remove it.
F . 8: Gear Cover
IG
2 Gear cover
24 Hex screws
43 Washer
21