Replace The Fan Coupler; Install The Gear Cover - Graco E-Flo EM0011 Repair Parts

Fan Coupler Replacement Kit 16J463

Replace the Fan Coupler

1. Remove the fan coupler (62) from the fan bearing
assembly (49) in the gear cover.
F . 9: Fan Components
IG
2 Gear cover
62 Fan coupler
2. Insert the new fan coupler.
22

Install the Gear Cover

1. Place the gear cover on the motor housing and
secure it with the eight 6 mm hex screws (24) and
washers (43). Torque to 15 ft-lb (20 N•m).
2. Using a 3 mm hex wrench, secure the fan cover (55)
with the three screws (56).
F . 10: Fan Cover
IG
55 Fan cover
56 Screws
3. Fill with oil. See Fill the Oil, page 18.
3A4801G