Removal Of The Torque Limiter - Konica Minolta Di1610 Service Manual

(5)

Removal of the Torque Limiter

1. Remove the Paper take up Clutch Gear.
☞ D-24
Torque Limiter
Precautions for Installation of the Torque Limiter
Coupling Gear has five dent for adjustment the Take-up Roller position. When Torque Lim-
iter is replaced, adjust the set position of the Coupling Gear so that the Take-up Roller
becomes level. The procedure is as follow.
12. Remove one screw and the Paper Take-Up Sole-
noid.
4136D018AA
13. Unhook two tabs and remove the Paper Take-Up
Clutch Gear.
4136D057AA
2. Unhook three tabs and take apart the Paper
Take-Up Clutch Gear then, remove the Torque
Coupling
Limiter.
Gear
4136D043AA
D-25
4136D044AA