Personnel Requirements; Personal Protective Equipment; Intended Use; Inadmissible Operating Conditions - Reflex Fillcontrol Auto Operating Instructions Manual

3.2

Personnel requirements

Only specialist personnel or specifically trained personnel may install and operate the equipment.
The electric connections and the wiring of the device must be executed by a specialist in accordance with all applicable national and
local regulations.
3.3

Personal protective equipment

When working at the system, wear the stipulated personal equipment such as hearing and eye protection, safety boots, helmet,
protective clothing, protective gloves.
See the national regulation of your country for personal protective equipment required.
3.4

Intended use

The device is a pressure maintaining station for heating and cooling water systems. It is intended to maintain the water pressure and to
add water within a facility system. The devices may be used only in systems that are sealed against corrosion and with the following
water types:
• Non-corrosive
• Chemically non-aggressive
• Non-toxic
The ingress of atmospheric oxygen by permeation into the entire heating and cooling water system, make-up water and similar must be
reliably minimised during operation.
3.5

Inadmissible operating conditions

The device is not suitable for the following applications:
• Mobile system operation.
• Outdoor operation.
• For use with mineral oils.
• For use with flammable media.
• For use with distilled water.
Note!
It is not permitted to make any modifications to the hydraulic system or the circuitry.
Fillcontrol Auto — 06.07.2016 - Rev. B
Safety
English — 7