Maintenance Schedule - Reflex Fillcontrol Auto Operating Instructions Manual

10.1

Maintenance schedule

The maintenance schedule is a summary of maintenance tasks to be carried out regularly.
Maintenance task
●
▲ = Check, ■ = Service,
= Clean
Check for leaks, see chapter 10.2 "Exterior leak test" on page 44 .
• Screw connections.
• "PU" pump.
Clean the dirt trap.
– see chapter 10.3 "Cleaning the dirt trap" on page 44 .
Check the makeup function.
– see chapter 7.6 "Function test" on page 29 .
Check the system-specific setting values in the controller, see
chapter 9.2.1 "Customer menu" on page 38 .
• Mindestbetriebsdruck „P
• "P " safety valve pressure.
SV
Note!
Compare the minimum working pressure with the initial pressure in the diaphragm expansion tank.
– If necessary, adjust the initial pressure in the diaphragm expansion tank.
".
0
Fillcontrol Auto — 06.07.2016 - Rev. B
Conditions Interval
▲ ■
●
▲
▲
Maintenance
Annually
Operating conditions
Annually
Annually
English — 43