Reflex Fillcontrol Auto Operating Instructions Manual page 37

23. Press "OK" and switch into the "Fault memory" main menu.
– Use the "▼▲" arrow keys to navigate and set the values in the selected main
menu.
24. Use the "▼▲" arrow keys to call the last 20 messages.
– The system stores the fault type, date, time and fault code.
– For a list of the ER fault codes and their meaning, see chapter 9.3 "Messages" on
page 39 .
25. Press "OK" and switch into the "Parameter memory" main menu.
– Use the "▼▲" arrow keys to navigate and set the values in the selected main
menu.
26. Use the "▼▲" arrow keys to call the last 10 entries for the "P0" minimum working
pressure.
– The last 10 entries of the minimum working pressure are stored with date and
time.
Information about the software version
Fillcontrol Auto — 06.07.2016 - Rev. B
Fault memory˃
ER 01...xx
Parameter memory˃
P0 = xx.x bar
Date | Time
Fillcontrol +
V1.00
English — 37
Controller
05
11