Ducati 1098 2007 Manual page 493

section
N 6.1
When renewing the cush drive rubbers (6), use a drift to remove the hub (7) from the clutch centre (10) and overcome the
resistance of the rubbers.
Slide off the spacer (16), taking care not to damage its internal O-ring (15).
Visually check the O-ring for wear and renew it if necessary.
Position service tool no. 88713.1805 to prevent the clutch drum from rotating when loosening the bolts (11).
Notes
If no cover parts need to be serviced, leave the clutch drum assembly and the primary drive gear installed on the clutch cover.
Undo the eight bolts (11) securing the clutch drum to the primary drive gear.
Remove the clutch drum.
WWW.PlanDeGraissage.ORG
1098/1098S - M.Y. 2007 - edition 00
Engine
6
7
11
11
11
11
16
6
A
B
C
D
E
F
G
H
L
M
N
P
119