Ducati 1098 2007 Manual page 422

section
N 4.1
Remove all tools installed for the timing check and tension the belts to their prescribed operating tension, as described in
Sect. D 5.
A
If the values obtained are outside the specified ranges (Sect. C 1.1), loosen the timing pulley bolts (M) and correct the value by
using the wrench supplied with service tool part no. 88713.1806 to turn the camshaft nut.
Then tighten the three timing pulley bolts (M) to the specified torque (Sect. C 3) and mark the new timing positions on the
relative components.
B
C
D
E
F
Refit the components removed in the procedure.
G
Operation
Refit the water pump cover
Refit the timing belts
Refit the rocker cover
H
Refit the airbox
Refit the fuel tank/seat cowling assembly E 3
Refit the radiator
Refit the side fairings
L
M
N
P
48
Engine
Section reference
N 3.3
N 4.2
N 4.4
L 6
N 3.2
E 2
WWW.PlanDeGraissage.ORG
M
M
88713.1806
1098/1098S - M.Y. 2007 - edition 00