Refitting The Front Brake System - Ducati 1098 2007 Manual

section
G 3

Refitting the front brake system

A
Before refitting the brake disc to the wheel, clean all contact surfaces thoroughly and smear a medium strength threadlocker on
the threads of retaining screws (14).
Screw in the bolts (14) securing the front brake disc (13) to the front wheel in this sequence: 1-3-5-2-4.
B
C
D
Tighten the bolts to the specified torque (Sect. C 3).
Refit the wheel to the motorcycle (Sect. G 1).
Notes
When refitting the brake system, pay particular attention to the positioning of the hose connection fittings on the master cylinder
E
(Sect. F 3) and the caliper.
When reconnecting the brake hose to the caliper or master cylinder, make sure to install the sealing washers (2) either side of
the hose end fitting.
After positioning the fitting correctly, tighten down the banjo bolt (1) to the specified torque (Sect. C 3).
F
G
H
Reconnect the hoses (3) and (15) to the front brake calipers (10) and (11) and tighten the screws (7) to their specified torque
(Sect. C 3).
L
Notes
Make sure that internal hose fitting (3) and external hose fitting (15) are installed to the right brake caliper (10).
M
N
P
28
Wheels - Suspensions - Brakes
2
LOCK
14
2
3
10
WWW.PlanDeGraissage.ORG
14
13
1
15
7
11
2
2
1098/1098S - M.Y. 2007 - edition 00