section
M 3
Air pressure sensor
This sensor is integrated in the instrument panel and indicates the atmospheric air pressure. This information is sent to the ECU
by a serial line (CAN line), and is used to correct the calibrations stored in the Flash Eprom.
Notes
To test the operation of this component, use the DDS tester and follow the instructions given under the heading "Guided
diagnosis", Sect. D 5.
WWW.PlanDeGraissage.ORG
1098/1098S - M.Y. 2007 - edition 00
Injection - ignition system
A
B
C
D
E
F
G
H
L
M
N
P
15