section
D 5
Deactivating the "maintenance" indication on the instrument panel
The message "SERV" is displayed on the instrument panel, indicating that the motorcycle should be serviced in accordance with
programmed maintenance plan. This indication is activated after the first 1000 km and thereafter at intervals of 12000 km.
After the scheduled service has been carried out, the indication must be switched off as follows:
Notes
The on-screen icons used during this procedure are explained in a table at the end of this section.
Switch on the DDS tester; see heading "Tester Power Supply".
Connect the power and diagnostics cable (2) to the diagnostics connector (A) on the tester and to the diagnostics socket (E) on
the motorcycle.
Enter the general functions menu by pressing the "Menu 1" icon (B).
Press the "Select vehicle" icon and, on the next screen, press the "Select motorcycle" icon; select the motorcycle model and
confirm, then select the version and confirm.
WWW.PlanDeGraissage.ORG
1098/1098S - M.Y. 2007 - edition 00
Use and maintenance
A
2
E
B
A
B
C
D
E
F
G
H
L
M
N
P
87