Ducati 1098 2007 Manual page 280

section
H 2
Remove the bottom yoke (1) complete with the steering stem from the frame tube.
Remove the ball race (B) of the lower bearing (3).
A
The inner race (A) of the lower bearing (3) and the relative oil seal (2) will remain on the steering stem.
B
C
Using a universal puller (of the type shown in the figure) remove the ring (C) from the steering stem, taking care not to damage
the seat.
D
E
F
Important
G
Once removed, the seals (2) and the bearings (3) must not be refitted.
Using a suitable drift, remove the outer bearing races (C) from the steering head. Proceed with extreme care to avoid damaging
the seats.
H
L
M
N
P
10
Frame
2
1
WWW.PlanDeGraissage.ORG
3
B
A
2
C
1098/1098S - M.Y. 2007 - edition 00