Other Setting; Setting Metronome; Setting Type Of Battery; Adjusting Lcd Contrast - Korg EFGSCJ 3 Owner's Manual

Other setting

You can set each global parameter, such as the settings for the
metronome, or you can execute utility functions, such as format-
ting a memory card.
TIP Please refer to the "Parameter Guide" for additional
details.
How to display each setting menu
1. Pressing Menu/Enter button on the pattern selection screen
enters the edit menu.
2. Pressing the < button or the > button to show "GLOBAL
PARAMETER" on display and then pressing Menu/Enter
button enables you to enter the global menu.
Pressing Menu/Enter button after showing "DATA UTILITY"
enables you to enter the DATA utility menu. Pressing Menu/
Enter button after showing "PART UTILITY" enables you to
enter the part utility menu.
3. Press the Write button after you complete each setting to save
the setting.
Turning power off without saving resumes to original
without saving the setting. Make sure to execute saving
when you want to keep the contents that you set.

1. Setting metronome

You can set the parameters for the metronome function. Using the
metronome is convenient when creating a pattern using the real
time recording function.
The metronome creates a sound in quarter tempo intervals.
1. Select the METRONOME from the Global menu.
2. Rotate the Value knob to adjust the settings.
When it's on, the metronome will always make sound during
both playing back and recording. Setting the metronome to
Rec 0, Rec 1, Rec 2 allows it to run only during recording.
Setting the metronome to Off disables the metronome.

2. Setting type of battery

Set in accordance with type of batteries in use.
1. Select BATTERY TYPE from the global menu.
2. Rotate Value knob to make setting.
Set to "Ni-MH" to use nickel metal hydride batteries. Set to
"Alkali" to use alkaline batteries.

3. Adjusting LCD contrast

You can adjust brightness of the display.
1. Select LCD CONTRAST from the global menu.
2. Rotate Value knob to make setting.

4. Prolonging battery life

You can set enabling or disabling the power save mode. Using this
system with battery power enters the power save mode to dim
back light of the display and LEDs.
1. Select POWER SAVE MODE from the global menu.
2. Rotate Value knob to make setting.
You can disable the power save mode by setting it to "Dis-
able."
You can enable the power save mode all the time by setting it to
"Enable."
You can enable it during using battery and disable it during
using the AC adapter by setting it to "Auto."
Default setting is in "Auto."
14

5. Setting auto power off

The auto power off function is a function to turn power off auto-
matically when you leave it without any operation for about
continuing 4 hours. You can set enabling or disabling this function.
1. Select AUTO POWER OFF from the global menu.
2. Rotate Value knob to make setting.
Set it to "Off" to disable the auto power off function.
Set it to "4 hours" to enable the auto power off function.
Default setting is in "4 hours."

6. Setting global MIDI channel

You can set the global MIDI channel.
1. Select MIDI GLOBAL CH. from the global menu.
2. Rotate Value knob to make setting.
7. Playing by synchronizing with ex-
ternal device
This system can be set for synchronization with MIDI or Sync
signals.
1. Select CLOCK MODE from the global menu.
2. Rotate the Value knob to set signals to be used as the master.
Internal: Sets this system as the master.
Auto: Sets an external device as the master, when the device is
connected. In a regular setting, this system is set as the master.
Ext.USB, Ext.MIDI and Ext.Sync: Sets signals from devices
connected to each jack as the master.

8. Using memory card

You can save the status of each setting to a memory card. You can
reinstall saved data by loading it.
Formatting
You need to format your memory card using the electribe/electribe
sampler in order to use a memory card.
You will lose all contents of a memory card when format-
ting it.
Never turn off the power or remove the memory card
during this procedure.
1. Select the CARD FORMAT option from the DATA utility
menu.
2. Press the Menu/Enter button. Upon completion of the format
procedure, the display will indicate OK.
Saving to a memory card
1. Select the EXPORT PATTERN option from the DATA utility
menu.
2. Press the Menu/Enter button.
Loading from a memory card
1. Select the IMPORT PATTERN option from the DATA utility
menu.
2. Select the pattern data to be loaded with the Value knob.
Select a file from the folder by using the Value knob and enter
the folder by pressing the Menu/Enter button. To exit the
folder, select the "Upper Folder" with the Value knob and
press the Menu/Enter button to go back up one level.
3. Press the Menu/Enter button to confirm.