05/ How To Set The Unit; Main Functions - ACME Dotline 360 User Manual

 To access the control menus, press the [MENU] button.
 Navigate the menu structure, using the [ENTER], [ UP] and [ DOWN] buttons.
 To select a menu option or to confirm a selection, press the [ENTER] button.
 To return to a higher level in the menu structure without making a change, press the
[MENU] button, or wait 30 seconds.
The main functions are shown below:
MENU
DMX Setting
DMX Last State
Fixture Setting

05/ How To Set The Unit

5.1 Main Functions

SUBMENU
Art-Net Setup
DMX Address
Channel Mode
RDM Device ID
Mode 3 DMX Addr
Mode 3 ART Addr
Blackout
Hold
Manu
Light Mode
Dimmer Curve
Ethernet IP Setup
Art-Net Port Setup
1-456 (57 CH)
1-499 (14 CH)
1-504 (9+ CH)
57 CH
14 CH
9+
1-504 (9+ CH)
1-465 (9+ CH)
Color Calibration
White
Max
Balance
Optically Linear
Square Law
Inverse Square Law
S Curve
- 8 -
OPTIONS
IP Address
Subnet Mask
Net 0-127
Subnet 0-15
Universe 0-15
(Default=1)
Disable
Enable
Red 125-255
Green 125-255
Blue 125-255