ACME Dotline 360 User Manual page 18

Zoom
Factory Setting
Select Zoom, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset zoom to its home positions), confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Factory Setting, press ENTER.
If you wish to reset the device to the factory settings, select Yes. If you
do not wish to reset anything, select No. Confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 17 -