Control Panel; How To Set The Unit; Main Function - ACME O2 Oxygen User Manual

3. Control Panel

1. Display: To show the various menus and the selected function
2. Button:
MENU
UP
DOWN
ENTER
3. POWER OUT: To connect to the next fixture
4. POWER IN: To connect to supply power
5. DMX IN:
For DMX512 link, use 3-pin XLR cable to link the unit and DMX controller (5-pin XLR is optional)
6. FIRMWARE UPGRADE: Used to upgrade fixture's firmware
7. DMX OUT:
For DMX512 link, use 3-pin XLR cable to link the next units (5-pin XLR is optional)

4. How To Set The Unit

4.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by pressing the ENTER button.
Use the UP/DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit
menu mode.
The main functions are shown below:
To enter into move backward or leave the menu
To go backward to move up in the menu
To go forward to move down in the menu
To perform the desired functions
6G