Description; Control Panel; How To Set The Unit; Main Function - ACME FARANDOLE AM-BAR User Manual

Table of Contents

3. Description

1. Display: To show the various menus and the selected function

2. Button:

DOWN

ENTER

3. Power In: Used to connect to supply power

4. Power Out: Used to connect to the next fixture

5. DMX In: For DMX 512 operation, use 3-pin XLR plug cable to link the units together

6. DMX Out: For DMX 512 operation, use 3-pin XLR plug cable to link the units together

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until the

required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically return

to the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.

In the event of disconnecting with mains power, press the UP button for one minute to enter into

menu mode. Press MENU button or let the unit idle one minute to exit.

The main functions are shown below（the grayed boxes are preset settings）:

To enter into move backward or leave the menu

To go to move down in the menu

To go backward to move up in the menu

To perform the desired functions

Table of Contents