Related Manuals for ACME CHEETAH LED-GF50
Summary of Contents for ACME CHEETAH LED-GF50
-
Page 1: Table Of Contents
TABLE OF CONTENTS CHEETAH 1. Safety Instruction 2. Technical Specification 3. Installation 4. How to Set the Unit 5. How to Control the Unit 5. DMX 512 Configuration LED-GF50 6. DMX 512 Connection 7. Trouble Shooting User Manual 8. Fixture Cleaning Professional Entertainment Technology... -
Page 2: Safety Instruction
1. Safety Instruction If using a 230Vac 50Hz power supply, do not connect in series Please read the instruction carefully which including more than 7 units, use another mains supply for the next 7 units. important information about the installation, operation and If using a 120Vac 60Hz power supply, do not connect in series WARNING maintenance. -
Page 3: How To Set The Unit
of the touch of people and has no one pass by or under it. 4. How To Set The Unit Power output 4.1 Control Panel Connect to supply power for the next unit. Safe ring Keep the installation safe. 10. Microphone: Receive music for the sound active. 4.2 Replace the lens You could replace the other lens if you want to, as following picture. - Page 4 DMX 512 Address Setting Press the MENU button up to when the is showing on the display. Pressing ENTER button and the display will blink. Use DOWN and UP button to change the DMX512 address. Once the address has been selected, press the ENTER button to setup. To go back to the functions without any change press the MENU button again.
- Page 5 display will blink. Use the DOWN and UP button to calibrate the dimmer for a maximum Display normal mode for the fixture putting on the floor. Display inversion mode for the fixture fixing under ceiling. output from (limited to 50% of the really max. output) to (maximum output is not limited).
-
Page 6: How To Control The Unit
Press the MENU button to show on the display. Press the ENTER button and all Stand By Blackout the unit channels of the unit will return to their standard position. Function 1. Sync. Strobe Show 1. Press to select color 2. -
Page 7: Dmx 512 Connection
5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+) 7. DMX 512 Connection Pin 4/5: Not used. The DMX 512 is widely used in intelligent lightings and with a maximum of 512 channels. 8. -
Page 8: Fixture Cleaning
8. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.