ACME PAGEANT 300ZR II User Manual
  1. Manuals
  2. Brands
  3. ACME Manuals
  4. DJ Equipment
  5. PAGEANT 300ZR II
  6. User manual

ACME PAGEANT 300ZR II User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for ACME PAGEANT 300ZR II

Summary of Contents for ACME PAGEANT 300ZR II

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. Safety Instructions ....................2 2. Technical Specifications ..................3 3. How To Set The Unit ....................5 3.1 Control Panel ....................5 3.2 Main Function ....................6 3.3 Home Position Adjustment................14 4. Control By Universal DMX Controller ..............15 4.1 DMX 512 Connection ..................

  • Page 3: Safety Instructions

    1. Safety Instructions Please read the instruction carefully which includes important information about the installation, usage and maintenance. WARNING Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. ...

  • Page 4: Technical Specifications

     The unit use non-users to replace an LED light source, and the light source should be replaced by a manufacturer or a service agent or someone with similar qualifications. Installation: The fixture should be mounted via its Omega Quick Release Clamp bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating and make sure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the fixtures weight.
  • Page 5 Control DMX Channel: 14/26/30 channels Control Mode: DMX512 Firmware Upgrade: Update via DMX link Construction Display: LCD display Data In/Out: 3-pin & 5-pin XLR Power In/Out: Power Connector in/out Protection Rating: IP20 Features Motorized linear zoom system Ring control, outstanding color macro effect Fast and mute operating, flicker free Dimensions/Weight 310x183x393mm, 9kgs...

  • Page 6: How To Set The Unit

    3. How To Set The Unit 3.1 Control Panel Wire Version： POWERCON Version： 10 11 1. Display: To show the various menus and the selected functions 2. Button: MENU To select the programming functions DOWN To go forward in the selected functions To go backward in the selected functions ENTER To confirm the selected functions...

  • Page 7: Main Function

    7. Power Switch (Wire Version): Turn on/off the power 8. Power Cable (Wire Version): Used to connect to supply power 9. Fuse (T 6.3A): To protect the unit from over-voltage or short circuit 10. MAINS IN (POWERCON Version): Used to connect to the main power supply 11.
  • Page 9 Wireless Version:...
  • Page 10 DMX Functions Enter MENU mode, select DMX Functions, press the ENTER button to confirm, use the UP/DOWN button to select DMX Address, DMX Channel Mode or View DMX Value. DMX Address To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the address from 001 to 512, press the ENTER button to setup.
  • Page 11 Tilt Inverse To select Tilt Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select No (normal) or Yes (tilt inverse), press the ENTER button to setup. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode. P/T Feedback To select P/T Feedback, press the ENTER button to confirm.
  • Page 12 Linear: The increase in light intensity appears to be linear as DMX value is increased. Square Law: Light intensity control is finer at low levels and coarser at high levels. Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels. S-cure: Light intensity control is finger at low levels and high levels and coarser at medium levels.
  • Page 13 Backlight Intensity To select Backlight Intensity, press the ENTER button to confirm. Use the UP/DOWN button to adjust the intensity from 1 (dark) to 10 (bright). Once selected, press the ENTER button to setup and store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
  • Page 14 Manual Test To select Manual Test, press the ENTER button, and then use the UP/DOWN button to select channel, and adjust the channel value. Once selected, press the ENTER button to setup, the fixture will run as the channel value indicates. Press the MENU button back to the last menu or exit menu mode let the unit idle one minute.

  • Page 15: Home Position Adjustment

    To select All, press the ENTER button to confirm. Use the UP/DOWN button to select No or Yes (the unit will run built-in program to reset all motors to their home positions), press ENTER button to store. Press MENU button to exit menu mode. Special Functions Enter MENU mode, select Special Functions, press the ENTER button to confirm, use the UP/DOWN button to select Fixture Maintenance or Factory Setting.

  • Page 16: Control By Universal Dmx Controller

    In the main functions, hold the ENTER button for at least 3 seconds into offset mode, use the DOWN/UP button up to select Pan, Tilt or Zoom, and press the ENTER button to confirm. Use the DOWN/UP button to adjust the home position of the Pan, Tilt or Zoom, Once the position has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.

  • Page 17: Address Setting

    3. Connect the unit together in a `daisy chain` by XLR plug from the output of the unit to the input of the next unit. The cable can not branched or split to a `Y` cable. DMX 512 is a very high-speed signal.

  • Page 18: Dmx 512 Configuration

    4.3 DMX 512 Configuration 14 Channels Mode(Mode 1): CHANNEL VALUE FUNCTION 000-255 000-255 PAN FINE 000-255 TILT TILT FINE 000-255 PAN/TILT SPEED 000-255 fast  slow SPECIAL FUNCTIONS 000-009 No function 010-014 Reset 015-255 No function DIMMER 000-255 0%~100% SHUTTER 000-019 No function 020-024...
  • Page 19 000-255 GREEN (0%  100%) 000-255 BLUE (0%  100%) 000-255 WHITE (0%  100%) COLOR PRESET 000-009 Open 010-014 Color 1 015-019 Color 2 020-024 Color 3 025-029 Color 4 030-034 Color 5 035-039 Color 6 040-044 Color 7 045-049 Color 8 050-054...
  • Page 20 235-239 Color change: fast 240-244 Color change: standard 245-249 Color change: slow 250-255 Open ZOOM 000-255 60°  10° 26 Channels Mode(mode 2): CHANNEL VALUE FUNCTION 000-255 000-255 PAN FINE 000-255 TILT 000-255 TILT FINE PAN/TILT SPEED 000-255 fast  slow ZOOM 000-255 60°...
  • Page 21 190-204 Strobe 8: random burst pulse, fast  slow 205-209 Open 210-224 Strobe 9: sine wave, fast  slow 225-229 Open 230-244 Strobe 10: burst, fast  slow 245-255 Open 000-255 RING 1 RED (0%  100%) 000-255 RING 1 GREEN (0%  100%) 000-255 RING 1 BLUE (0% ...
  • Page 22 233-240 Color31 241-247 Color32 248-255 Color33 000-255 RING 2 RED (0%  100%) 000-255 RING 2 GREEN (0%  100%) 000-255 RING 2 BLUE (0%  100%) 000-255 RING 2 WHITE (0%  100%) RING 2 COLOR PRESET 000-255 (The same as CH14: RING 1 COLOR PRESET) 000-255 RING 3 RED (0% ...
  • Page 23 30 Channels Mode (mode 3): CHANNEL VALUE FUNCTION 000-255 PAN FINE 000-255 000-255 TILT 000-255 TILT FINE PAN/TILT SPEED 000-255 fast  slow ZOOM 000-255 60°  10° SPECIAL FUNCTIONS 000-009 No function 010-014 Reset 015-255 No function DIMMER 000-255 0% ~ 100% SHUTTER 000-019...
  • Page 24 000-255 RING 1 GREEN (0%  100%) 000-255 RING 1 BLUE (0%  100%) 000-255 RING 1 WHITE (0%  100%) RING 1 COLOR PRESET 000-009 Open 010-017 Color1 018-024 Color2 025-032 Color3 033-039 Color4 040-047 Color5 048-054 Color6 055-061 Color7 062-069 Color8...
  • Page 25 000-255 RING 2 WHITE (0%  100%) RING 2 COLOR PRESET 000-255 (The same as CH14: RING 1 COLOR PRESET) 000-255 RING 3 RED (0%  100%) 000-255 RING 3 GREEN (0%  100%) 000-255 RING 3 BLUE (0%  100%) 000-255 RING 3 WHITE (0% ...
  • Page 26 000-015 No Function 016-039 Macro 1 040-063 Macro 2 064-087 Macro 3 088-111 Macro 4 112-135 Macro 5 136-159 Macro 6 160-183 Macro 7 184-207 Macro 8 208-231 Macro 9 232-255 Macro 10 RING COLOR MACRO 3 000-015 Macro 1 016-027 Macro 2 028-039...

  • Page 27: Troubleshooting

    5. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of power and main fuse. 2.
  • Page 28 Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 2004/108/EC. EN 55103-1: 2009+A1: 2012; EN 55103-2: 2009; EN 61000-3-2: 2014; EN 61000-3-3: 2013. &...

Table of Contents