ACME Dotline 360 User Manual page 7

1. Display
2. Buttons
3. OFFLINE SETTING
4. DMX IN
5. POWER IN
6. ETHERNET
7. FUSE(T 10A)
8. POWER OUT
9. DMX OUT
10. BUTTON 1
11. BUTTON 2
To show the various menus and the selected function
MENU To enter into move backward or leave the menu
 UP
To go backward to move up in the menu
 DOWN
To go forward to move down in the menu
ENTER To perform the desired functions
For DMX512 link, use 5-pin XLR cable to link the unit and DMX
controller to input DMX signal (3-pin XLR cable is optional)
To connect to supply power
Transfers fixture's information to a main controller
Protects the unit from damage of over current or short circuit
To connect to the next fixture
For DMX512 link, use 5-pin XLR cable to link the next units to
output DMX signal (3-pin XLR cable is optional)
When splicing the fixtures, push it to the "LOCK" position
Tilt lock. Push it to the "UNLOCK" position before powering up the
fixture
- 6 -