ACME Dotline 360 User Manual page 14

Tilt Feedback
Bl. O. Tilt Moving
Fan Mode
Invert Pixel Order
Artnet to DMX
Select Tilt Feedback, press ENTER.
Use UP/DOWN button to select Disable (tilt feedback deactivated) or
Enable (tilt feedback activated), confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Bl. O. Tilt Moving, press ENTER.
Use UP/DOWN button to select Disable (blacks out while tilt move
deactivated) or Enable (blacks out while tilt move activated), confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Fan Mode, press ENTER.
Use UP/DOWN button to select Silent or Auto, confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Invert Pixel Order, press ENTER.
Use UP/DOWN button to select Disable or Enable, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Artnet to DMX, press ENTER.
Use UP/DOWN button to select Disable or Enable, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 13 -