Twinaxial copper cables
Veritas 5250 Appliance and Veritas 2U12 65.5TiB/72TB Storage Shelf cables
Fiber optic cables require Small Form-factor Pluggable (SFP+) transceivers, which
are provided with each device having Fibre Channel ports. The diagram shows the
SFP, labeled 1, and the fiber optic cable which is attached to it, labeled 2.
Supported SFPs are listed:
Finisar
■
JDSU
■
Note: Veritas recommends that you use Finisar FTLX8574D3BCV SFP part for
10G connectivity and Mellanox MMA2P00-AS SFP part for 25G connectivity.
See
"Power cables"
on page 58.
See
"SAS-3 cable"
on page 62.
See
"Twinaxial copper cables"
See
"Network cable"
The Veritas 5250 Appliance communicates with Ethernet networks through high
speed Twinaxial copper cables. If you configure the appliance to communicate with
10/25 Gb Ethernet networks, these cables connect to the 10/25Gb NIC card in the
appliance.
These cables are also known as Direct-Access Copper (DAC) cables, and are
available in 1-meter, 3-meter, or 5-meter lengths.
on page 61.
on page 59.
Twinaxial copper cables
61