VERITAS 5250 Product Description Manual page 17

System Status LED states (continued)
Table 1-5
Color State
Green ~1 Hz blink
Amber ~1 Hz blink
About the 5250 Appliance control panel
Criticality Description
Degraded System degraded (continued):
(continued)
BMC booting Linux. (Indicated by Chassis ID
■
solid ON). System in degraded state (no
manageability). Control has been passed
from BMC uBoot to BMC Linux itself. It will
be in this state for 10-20 seconds.
BMC Watchdog has reset the BMC.
■
Power unit sensor offset for configuration
■
error is asserted.
Hard disk drive HSC is off-line or degraded.
■
Non-critical Non-fatal, although the system is likely to fail due
to the following issues:
The system is
operating in a Critical threshold crossed – Voltage,
■
degraded state temperature (including HSBP temp), input
with an power to power supply, output current for
impending failure main power rail from power supply and
warning. PROCHOT (Therm Ctrl) sensors.
However, the
VRD Hot asserted
■
system is still
Minimum number of fans to cool the system
■
functioning.
not present or failed
Hard drive fault
■
Power Unit Redundancy sensor – Insufficient
■
resources offset (indicates not enough power
supplies present)
Correctable memory error threshold has been
■
reached for a failing DIMM when the system
is operating in a non-redundant mode.
About the Veritas 5250 Appliance 17