Twinaxial Copper Cables - VERITAS 5150 Product Description Manual

Twinaxial copper cables

Multi-mode fiber cable
Figure 2-4
Fiber optic cables require Small Form-factor Pluggable (SFP+) transceivers, which
are provided with each device having Fibre Channel ports. The diagram shows the
SFP, labeled 1, and the fiber optic cable which is attached to it, labeled 2.
Supported SFPs are listed:
Finisar
■
JDSU
■
See "Power cables" on page 23.
See "Network cable"
See "Twinaxial copper cables"
The Veritas 5150 Appliance communicates with Ethernet networks through high
speed Twinaxial copper cables. If you configure the appliance to communicate with
10 Gb Ethernet networks, these cables connect to the 10/25 Ethernet card in the
appliance.
on page 25.
on page 26.
Veritas 5150 Appliance cables
Twinaxial copper cables
26