VERITAS 5250 Product Description Manual page 21

Veritas 5250 Appliance rear panel features and connectors
Table 1-7
(continued)
Number Function
7 eth0/host0
NetBackup Appliance (eth0):
■
Used for the initial configuration of the appliance. After completing the initial
configuration, you can connect NIC1 (eth0) to an administrative network that
does not provide any backup data transfer. For more information, see the
NetBackup™ 52xx Appliance Initial Configuration Guide.
Note:
Veritas does not support forming a NIC bond using eth0/NIC1 with
other eth/NIC ports.
Flex Appliance (host0):
■
A 1-GbE port copper connector that you can connect to an administrative
network to manage the appliance system. It is bonded during initial
configuration as a standalone bond mgmt0.
8 eth1/NIC0
NetBackup Appliance (eth1):
■
A 1-GbE port for general use.
Flex Appliance (NIC0):
■
A 1-GbE port for general use.
9 eth2/NIC1
NetBackup Appliance (eth2):
■
A 1-GbE port for general use.
Flex Appliance (NIC1):
■
A 1-GbE port for general use.
10 eth3/NIC2
NetBackup Appliance (eth3):
■
A 1-GbE port for general use.
Flex Appliance (NIC2):
■
A 1-GbE port for general use.
11 PCIe riser assembly 1 *
12 PCIe riser assembly 2 *
About the Veritas 5250 Appliance
About the 5250 Appliance rear panel
21