D Series Storage Shelf Control Panel - VERITAS 5250 Product Description Manual

D Series Storage Shelf control panel

Disk drive carrier status indicator pattern
Table 2-12
Status indicator pattern (RAID Only)
Blinks green two times per second
Off
Blinks green, amber, and off
Blinks amber four times per second
Blinks green slowly
Steady green
Blinks green for three seconds, amber for
three seconds, and turns off in six seconds.
Note: The hard disk drive status indicator remains off until all hard disk drives are
initialized after system power is turned on. Hard disk drives are not ready for insertion
or removal during this time.
The Veritas D Series 2U12 65.5TiB/72TB Storage Shelf control panel is installed
on the front left side of the storage shelf.
Veritas D Series 2U12 65.5TiB/72TB Storage Shelf control panel
Figure 2-12
Veritas 2U12 65.5TiB/72TB Storage Shelf
Components of the D Series Storage Shelf
Condition
Identify hard disk drive or preparing for
removal
Hard disk drive ready for insertion or removal
Hard disk drive predicted failure
Hard disk drive failed
Hard disk drive rebuilding
Hard disk drive online
Rebuild aborted
54