About The System Status Led States - VERITAS 5250 Product Description Manual

About the System Status LED states

Control panel system LED descriptions (continued)
Table 1-4
Label LED
G System Status LED
The System Status LED is a bi-color (Green/Amber) indicator that shows the current
health of the system. The appliance provides two locations for this feature. The first
location is on the Front Control Panel, while the second location is on the back edge
of the server board.
Figure 1-6
The following table provides a description of each LED state.
About the 5250 Appliance control panel
System information
The System Status LED is bi-color indicator that uses
the colors green and amber to display the current
health of the appliance.
Two locations are provided for you to monitor the
health of the system. You can find the first location
on the front control panel, while the second location
is located on the back edge of the server board. It is
viewable from the rear of the appliance. Both LEDs
show the same state of health.
See "About the System Status LED states"
on page 15.
System Status LED control panel location
System
Status
LED
About the Veritas 5250 Appliance 15