Table of Contents
Advertisement
5.11.11 UPnP
You can map the relationship between the LAN and the WAN to access the Device on the LAN
through the IP address on the WAN.
5.11.11.1 Configuring Router
Procedure
Step 1
Log in to the router to set the WAN port to enable the IP address to connect into the WAN.
Step 2
Enable the UPnP function on the router.
Step 3
Connect the Device with the LAN port on the router to connect into the LAN.
Select Main Menu > NETWORK > TCP/IP, configure the IP address into the router IP
Step 4
address range, or enable the DHCP function to obtain an IP address automatically.
5.11.11.2 Configuring UPnP
Procedure
Select Main Menu > NETWORK > UPnP.
Step 1
Step 2
Configure the settings for the UPnP parameters.
Parameter
Port Mapping
Status
Figure 5-195 UPnP
Table 5-58 UPnP parameters
Description
Enable the UPnP function.
Indicates the status of UPnP function.
● Offline: Failed.
● Online: Succeeded.
305
User's Manual
Advertisement
Table of Contents
