Table of Contents
Advertisement
First startup, filling in company information
At first startup, you are required to fill in your company information and the serial number of your ArcValidator L 650
load bank. This information will be used in the verification reports and certificates.
You can also change the language of the software application in this window:
1.
To change the language of the software application from English to another language, open the Language list and
select the language you want.
2.
Type the ArcValidator L 650 serial number. You can find it in the load bank's rating plate located on the bottom of
the load bank.
>> The serial number will be validated via Kemppi internet servers.
3.
Fill in the name, address, email and phone information for your company.
4.
To get your company logo on the verification certificates, click Import image on the right and select the image file.
5.
Click OK to save the information and move on to the verification file list.
You can change the company profile information later by clicking the name of your company in the upper right
corner of the ArcValidator software application, like the example below.
© Kemppi
9
ArcValidator
Operating manual - EN
AVPCRC / 2224
Advertisement
Table of Contents
