Table of Contents
Advertisement
3.
Modify the information on the manufacturer, equipment model and the product code, or click on Create copy to
create a copy.
4.
Select or remove the welding process used: MIG, MMA or TIG.
5.
Specify or edit the minimum and maximum values for current or voltage.
6.
When you are done, click OK to save the changes and close the window.
Adding welding processes
You can add welding processes to the equipment profiles you have created yourself. The provided Kemppi equipment
profiles cannot be edited.
To add new welding processes to an equipment profile:
1.
Click the Equipment button on the top of the window to open the Equipment view.
2.
Select the equipment profile for editing.
>> The Edit equipment profile window opens.
3.
Click the plus (+) button to add a new welding process.
4.
Select a welding process from the list: MIG, TIG or MMA.
5.
When you are done, click OK to save the changes and close the window.
© Kemppi
30
ArcValidator
Operating manual - EN
AVPCRC / 2224
Advertisement
Table of Contents
