W_Disable1; W_Disable2 - Quectel EM160R-GL Hardware Design

ANT_CONFIG

3.8.1. W_DISABLE1#

The module provides a W_DISABLE1# pin to disable or enable airplane mode through hardware
operation. The W_DISABLE1# pin is pulled up by default. Driving it low will set the module to airplane
mode. In airplane mode, the RF function will be disabled.
The RF function can also be enabled or disabled through AT commands.
Table 16: RF Function Status
Logic Level
High Level
Low Level
3.8.2.

W_DISABLE2#*

The module provides a W_DISABLE2# pin used to disable or enable the GNSS function. The
W_DISABLE2# pin is pulled up by default. Driving it low will disable the GNSS function. The combination
of W_DISABLE2# pin and AT commands can control the GNSS function.
Table 17: GNSS Function Status
W_DISABLE2# Level
High Level
Low Level
EM160R-GL_Hardware_Design
68 DI
AT Command
AT+CFUN=1
AT+CFUN=0
AT+CFUN=4
AT+CFUN=0
AT+CFUN=1
AT+CFUN=4
AT Command
AT+QGPS=1
AT+QGPSEND
AT+QGPS=1
AT+QGPSEND
Antenna configuration
RF Function
Enable
Disable
Disable
Disable
GNSS Function Status
Enable
Disable
LTE-A Module Series
Operating Mode
Full functionality mode
Minimum functionality mode
Airplane mode
Airplane mode
39 / 73