W_Disable1; W_Disable2 - Quectel RM502Q-GL Hardware Design

5g module

Hide thumbs Also See for RM502Q-GL:

Table of Contents

AP2SDX_STATUS

NOTE

"*" means under development.

3.10.1. W_DISABLE1#*

RM502Q-GL provides a W_DISABLE1# pin to disable or enable airplane mode through hardware

operation. The W_DISABLE1# pin is pulled up by default. Driving it low will set the module to airplane

mode. In airplane mode, the RF function will be disabled.

The RF function can also be enabled or disabled through software AT commands. The following table

shows the RF function status of the module.

Table 13: RF Function Status

W_DISABLE1# Level

High Level

Low Level

RM502Q-GL provides a W_DISABLE2# pin to disable or enable the GNSS function. The W_DISABLE2#

pin is pulled up by default. Driving it low will disable the GNSS function. The combination of

W_DISABLE2# pin and AT commands can control the GNSS function.

RM502Q-GL_Hardware_Design

Status indication from AP

AT Commands

AT+CFUN=1

AT+CFUN=0

AT+CFUN=4

AT+CFUN=0

AT+CFUN=1

AT+CFUN=4

RM502Q-GL Hardware Design

RF Function Status

Enabled

Disabled

5G Module Series

1.8 V power

domain

41 / 77

Table of Contents