Installation Via Ikvm - Advantech FWA-3051 User Manual

H. If the connection is successful, after powering on the unit, you should be able to view the BIOS
Power-On-Self-Test (POST) screen in the PuTTY terminal as below:
Note:
Please be aware that during the initial startup phase, the BIOS may be performing
tasks even if the console appears inactive. It might take a moment for the BIOS POST
screen to show up. However, the BIOS has been optimized for a swift boot time. It will
progress through the POST rapidly and then attempt to boot an OS based on the boot
options selected in the BIOS.
In case you would extend the time, the BIOS displays the POST screen and waits for a key press to enter
the setup menu, you can do so via the BIOS setup menu. Please refer to

2.4.3 Installation via iKVM

The FWA-3051 is equipped with Out-of-band (OOB) BMC that features a Web UI, providing a wide range
of configuration options, including iKVM for graphic OS installations.
To initiate, set up the BMC IP within the BIOS (please reference to
using https://<IP>. Once there, you have the capability to remotely install either a text-based or GUI-
based OS onto your PC.
For details guide on iKVM features, please refer the "Node Explorer user manual (Section 3.5.3)".
Copyright 2024 Advantech Co. Ltd. All rights reserved.
Figure 2.4-9 BIOS POST Screen
Section 4.2 for details.
Section 4.4.1.1) and then access it
Page 23