Advantech FWA-3260 User Manual

Advantech FWA-3260 User Manual

1u middle-range network appliance based on intel xeon d processors system on chip
Table of Contents

Advertisement

U
M
SER
ANUAL
R
0.02
D
2016/03/02
EVISION
ATE
FWA-3260
1U M
-R
N
A
IDDLE
ANGE
ETWORK
PPLIANCE
I
® X
® D P
BASED ON
NTEL
EON
ROCESSORS
S
O
C
YSTEM
N
HIP
Copyright 2014 Advantech Co. Ltd. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FWA-3260 and is the answer not in the manual?

Questions and answers

Summary of Contents for Advantech FWA-3260

  • Page 1 ANUAL 0.02 2016/03/02 EVISION FWA-3260 1U M IDDLE ANGE ETWORK PPLIANCE ® X ® D P BASED ON NTEL ROCESSORS YSTEM Copyright 2014 Advantech Co. Ltd. All rights reserved.
  • Page 2 Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
  • Page 3 FWA-3260. This manual is organized as follows: • Section 1: Getting Started helps you with the first steps with the FWA-3260. • Section 2: Product Specification provides a detailed description of the FWA-3260 and its features.
  • Page 4 Please send all such - in writing to: ncg@advantech.com Acknowledgements Xeon, QuickAssist and Intel are trademarked by Intel Corp. All other product names or trademarks are properties of their respective owners. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 4...
  • Page 5: Table Of Contents

    LCD Module ....................39 2.4.11 Mass Storage ....................39 2.4.12 BIOS ........................ 40 2.4.12.1 Password protection .................. 40 2.4.12.2 BIOS defaults ....................41 2.4.12.3 PCIe Tree ..................... 41 _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 5...
  • Page 6 Reinstalling the top cover ................81 3.3.3 Disk Installation ....................81 3.3.3.1 2.5” HDD drive .................... 81 3.3.3.2 M.2 SSD....................... 86 3.3.4 Memory Installation ..................87 _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 6...
  • Page 7 APPENDIX: CONNECTOR PINOUT AND LED INFORMATION ........94 BIOS POST CODES ....................97 APPENDIX: POWER SUPPLY SPECIFICATION ............103 APPENDIX: DECLARATION OF CONFORMITY ............104 APPENDIX: WARRANTY AND RMA............... 105 _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 7...
  • Page 8 Figure 47: Top cover screw locations ( left/rear/right) ..............80 Figure 48: Slide Top Cover back ......................81 Figure 49: Top Cover Flange Disengagement ..................81 Figure 50: Screws for HDD mounting ....................81 _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 8...
  • Page 9 Figure 69: Unlocking and removing a DIMM ..................93 Figure 70: RJ45 Console connector ....................94 Figure 71: Stacked USB Type A connector ..................95 Figure 72: RJ45 10/100/1000 Base-T connector ................95 _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 9...
  • Page 10 Table 47: RJ45 10/100/1000 Base-T connector pin assignment ............96 Table 48: RJ45 connector LED indication ..................96 Table 49: BIOS POST Codes ......................102 Table 50: Single AC Power Supply Specification ................103 _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 10...
  • Page 11 Power Supply Unit Pre-boot Execution Environment QuickAssist Technology QuickPath Interconnect RASUM Reliability, Availability, Serviceability, Usability, Maintainability RDIMM Registered DIMM RMCP Remote Management Control Protocol Receive _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 11...
  • Page 12 Sensor Data Record SerDes Serializer/Deserializer Serial Over LAN Solid State Disk Software Trusted Platform Module Transmit UDIMM Unbuffered DIMM UHCI Universal Host Controller Interface Universal Serial Bus _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 12...
  • Page 13: Getting Started

    Advantech intends to provide all necessary information to install and handle the FWA-3260 in this manual. Because of the complexity of this product and its various uses, we do not guarantee that the given information is complete.
  • Page 14: Safety Precautions - Static Electricity

    Table 1 is missing or damaged, please contact your Advantech representative. When opening the box, you will find the FWA-3260 embedded in protective foam and the accessory box embedded to the foam. Remove the accessory box first and then pull out the unit including the protective foam using both hands.
  • Page 15: Table 1: Packaging List

    Mounting Mounting Ears for Rack Ears mounting Mounting Ear Screws (6pcs) for Screw Set mounting the ears on the chassis Table 1: Packaging List _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 15...
  • Page 16: Installation And Configuration

    1.3.1 Rack Mounting The FWA-3260 appliance is designed to be installed in a standard 19-inch rack. Please follow the basic guidelines below for rack mounting: Mount the mounting ears on the each side of the unit using the screws included.
  • Page 17: Powering On

    Before connecting the FWA-3260 to the power outlet, please make sure that the power rating of the outlet and the FWA-3260’s PSU match. Please also make sure that the primary circuit and all power distribution in not overloaded. Inrush current and steady state power...
  • Page 18: Figure 3: Putty Session Configuration

    Figure 3: PuTTY Session Configuration Figure 4: PuTTY Serial Configuration _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 18...
  • Page 19: Figure 5: Putty Keyboard Settings

    Figure 5: PuTTY Keyboard Settings Figure 6: PuTTY Colour Settings _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 19...
  • Page 20: Installing An Os

    Install an image from a USB key Install an OS via network boot. If you use Advantech’s services to pre-install an OS, you can skip the following section. 1.3.4.1 Pre-Installed reference OS If you receive this manual along with a sample unit, the system will have a reference OS installed by default.
  • Page 21: Installing An Os Via Network Boot

    PuTTY as described earlier. Power on the appliance. The boot priority in the FWA-3260’s BIOS is giving SATA devices higher priority than USB devices. This is a safety measure to avoid that any end user can tamper the unit when installed in the field with a bootable USB stick.
  • Page 22: Table 2: Pxe Bios Options

    2. When set Network Stack is enabled, and then go to item of “ BIOS/ Advanced-> CSM Parameters -> Network” to enable PXE ROM function, set it as “Legacy” (IPV4 PXE) function . _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 22...
  • Page 23 4. User may re-login in BIOS, choose BIOS/ boot item, it will has “Network Device BBS Priorities” item and set UEFI PXE LAN boot sequence priority. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 23...
  • Page 24 The detailed process and required configuration of such network install will heavily depend on the target OS and boot loader / miniOS used. Please refer to the related documentation available. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 24...
  • Page 25: Getting Help: Technical Support And Assistance

    DHCP required for PXE booting may conflict with existing DHCP servers in your network. The PXE client in the FWA-3260 sends the system’s GUID as part of the DHCP Request. Some boot servers have mechanisms to automatically configure the target OS image based on the client system’s GUID.
  • Page 26: Product Specification

    PECIFICATION Overview The FWA-3260 1U network appliance features Intel's® Xeon® Processor D System On Chip to meet the need for higher core count, larger and faster memory as well as increased IO performance without sacrificing cost efficiency in a compact footprint.With up to 16 Xeon class cores and 1.5MB last level cache per core tightly integrated with DDR4 memory...
  • Page 27: Product Versions

    PCIe expansion card mounting area Inner fan Middle board for NMCs Table 3: System components Product Versions The FWA-3260 is available in the following standard configurations. Contact your Advantech representative for availability of other configuration options. Model Name Configurations FWA-3260A-00E Intel Xeon D-1528(6C), 6GbE + 2 10GE ports, red.
  • Page 28: Technical Specifications

    1 x RS232 Console port (RJ-45 connector) & Peripherals LCD Module 16 x 2 graphic display, 5 buttons Module (optional) Without LOM module IPMI with Aspeed AST1250 chip _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 28...
  • Page 29: Table 5: Specifications

    430x500x44 mm (W x L x H), 17”x19.7”x 1.7” Physical Weight(N.W) 10 Kg (22lb) The "Recommended NMC Module List" section for a list of currently available NMCs Table 5: Specifications _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 29...
  • Page 30: System Dimensions

    Figure 9: System Dimensions 2.3.2 Regulatory Compliance The Advantech FWA-3260 meets the specifications and regulations for safety and EMC defined in this chapter. Please contact your Advantech representative for a copy of the declaration of conformity or detailed test reports. 2.3.2.1 Safety USA/Canada UL 60950-1 2 Edition//CSA C22.2 No.
  • Page 31: Ce Mark

    SFP+ Connector 2 10G SFP+ Management Port Management LAN Port 0/1 Traffic Port 1~4 Traffic LAN Port 1~4 NMC slots 2 NMCs slot for NICs expansion _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 31...
  • Page 32: Led Details

    3 Rear system fan exhaust On/Off Button Power DC on/off button AC Power connector (2 skus with single and AC Power inlet redundant PSU options) Table 9: Rear elements _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 32...
  • Page 33: System Block Diagram

    System block diagram Figure 13: Block diagram 2.4.4 Processor(s) The FWA-3260 supports one Xeon D processor. The table below gives an overview of the processor SKUs for Network and Storage infrastructure which can be supported on the FWA- 3260: _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co.
  • Page 34: Memory

    For details on the features of the Xeon D processor, please refer to documentation available from Intel. 2.4.5 Memory Four DDR4 RDIMMs or UDIMMs are supported on the FWA-3260. Both DIMMs reside on the CPU’s memory channel A/B and can support operation up 2400MT/s (CPU SKU dependent). _20160302.docx FWA-3260 User Manual v02...
  • Page 35: Chipset

    The chipset / PCH functionality is integrated into the Xeon D SoC. 2.4.6.1 USB The FWA-3260 supports two external USB2.0/3.0 ports which can be used to connect low, full and high speed devices. The 5V supply rail supplied to external devices is current limited by a self resetting, electronic fuse to 500mA.
  • Page 36: Sata

    Table 14: SATA Ports Figure 15: m.2 SSD The following list summarizes the drives validated on the FWA-3260: Please contact you Advantech representative for the most recent list of validated peripherals or if you would like to use modules not listed. Vendor...
  • Page 37: Legacy Functions And Io

    The PCH integrates two SMBus controllers. The first one is used as interface to external devices such as EEPROMs, the hardware monitor; the second controller is not used on the FWA-3260. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 37...
  • Page 38: Network Interfaces (Onboard)

    2.4.14.2. 2.4.7 Network interfaces (onboard) The FWA-3260 supports a total of 6 network ports copper and 2 10G SFP+ port fiber on board. There are 2 i210 GbE LAN device for management(locations F6), and 1 i350 for “traffic” ports(locations F7), the i210 is a single LAN chip and i350 GbE LAN device is a four port LAN chip, compact, low power components that offer a fully integrated Gigabit Ethernet Media Access Control (MAC) and Physical Layer (PHY) port.
  • Page 39: Tpm Module

    2.4.11 Mass Storage Up to four SATA devices and two m.2 SSD are supported by the FWA-3260. In the default configuration, two SATA 2.5”HDD devices are supported (location M1): an onboard m.2 socket with 22x42 or 60 or 80 type support (location M2) and another on board m.2 socket with 22x42 type support only(location M3).
  • Page 40: Bios

    Figure 16: Mass storage components 2.4.12 BIOS The FWA-3260’s BIOS is based on AMI’s APTIO BIOS and compliant to the UEFI, SMBIOS and ACPI specifications. The BIOS performs probing, initialization and configuration of the FWA-3260 and initializes the OS boot process at the end of POST (Power On Self Test).
  • Page 41: Bios Defaults

    2.4.12.2 BIOS defaults The BIOS comes with a set of configuration parameters when shipped by Advantech referred to as “Optimized Defaults” or “factory defaults”. The user can change BIOS settings via the setup menu either temporarily or permanently by saving the changes as “User defaults”.
  • Page 42: Platform Management

    Platform Management A Nuvoton NCT7904 Hardware Monitor Chip (HWM) provides hardware monitoring capabilities on the FWA-3260. The HWM chip is connector to the PCH’s SMBus. Standard software packages such as “lmsensors” can be used on the host to provide sensor information under Linux.
  • Page 43 Monitor FAN4 Speed In addition to the HWM, the Xeon D CPU features integrated temperature sensors (1 per core) that are supported by the module of lmsensors: _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 43...
  • Page 44: Figure 17: Thermal Sensor Locations

    Figure 19: Display of CPU temperature The diagram below shows the location of the various temperature sensors: Figure 17: Thermal Sensor Locations _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 44...
  • Page 45: Power Supplies

    2.4.14.1 Product Labelling The FWA-3260 contains a number of labels that help to identify the product as well as the MAC addresses used by the system. The type label is placed on the bottom side of the unit and other labels can be found inside the unit.
  • Page 46: Figure 19: Product Labels (Internal)

    MAC Address for Traffic Port 1~4 MAC Address for Traffic Port 5/6 Motherboard Serial Number System Serial Number CE/FCC/RoHS/WEEE labels (on PCB) PSU labels (PSU specific) _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 46...
  • Page 47: Electronic Label: Fru Eeprom

    Table 21: Product Labels 2.4.14.2 Electronic label: FRU EEPROM The FWA-3260 supports an onboard FRU EEPROM which can be accessed via SMBus 0 using afru. The table below shows the FRU EEPROM format: DMI Table Field in DMI Table Field in System FRU...
  • Page 48: Advanced Platform Features

    2.5.2 Watchdog The FWA-3260 provides a programmable watchdog that may be used to reset the system in case it bites due to malfunctioning application software to restore the unit to a known good state. The watchdog is based on H/W monitor 7904D timer. The watchdog timer is supported under Linux via a kernel driver.
  • Page 49: Lan Bypass Segments

    2.5.3.3 LED Behaviour Advantech Advanced LAN bypass uses a LED to show the state of a bypass segment. Usually the bypass LED is implemented as a dual colour LED combined with a regular LAN port LED. The table below shows the status of the bypass LED, only. For a complete description of port LEDs please refer to appendix A.3.2).
  • Page 50: Available Accessories And Related Products

    Table 23: Bypass States and LED behaviour Available Accessories and Related Products 2.6.1 Accessories The following accessories are available for ordering. Please contact your Advantech representative for a list of available and supported peripherals such as memory modules, hard disks and solid state drives Model Name...
  • Page 51: Configuration And Service

    BIOS Setup Menu This section describes the FWA-3260’s UEFI BIOS based on AMI’s APTIO BIOS. Users can modify BIOS settings and control the special features of the FWA-3260 using the BIOS setup menu. Please note that Advantech supports shipping the FWA-3260 with custom BIOS defaults to simplify the deployment and integration for our customers.
  • Page 52: Main Setup Menu

    Main Setup screen shown below. Users can always return to the Main setup screen by selecting the Main tab. Figure 24: BIOS Setup Main screen _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 52...
  • Page 53: Setting System Time And Date

    Please not that system time and date are set during manufacturing process according to factory’s local time zone. You may need to update system time to reflect the desired time zone when you receive the unit. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 53...
  • Page 54: Platform Setup Menu

    3.2.2 Platform Setup Menu Select the Platform tab from the FWA-3260 setup screen to enter the Platform Setup screen. Users can select any of the items in the left frame of the screen, such as the Trusted Computing Configuration, to go to the sub menu for that item. Users can display an Platform BIOS Setup option by highlighting it using the <Arrow>...
  • Page 55: Figure 26: Platform Setup: Console Redirection Menu

    7 / 8 Defines number of data bits in a character. None / Even / Parity Odd / Mark / Defines the parity scheme used. Space _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 55...
  • Page 56: Usb Configuration

    This sub menu allows you to change the settings used for USB and to get an overview of the USB devices detected by the BIOS. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 56...
  • Page 57: Figure 27: Platform Setup: Usb Configuration Menu

    Device power-up Auto delay Maximum time the device will take before it delay properly reports itself to the Host Controller. Manual Device power-up delay _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 57...
  • Page 58: Trusted Computing

    Shows TPM Enablement Status Status information Display Only TPM Active State Shows TPM Activation Status TPM Owner Display Only Shows Current TPM Owner Table 28: Trusted Computing Menu _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 58...
  • Page 59: Figure 29: Platform Setup: Trusted Computing With Tpm2.0

    Platform Enable or Disable Platform Hierarchy Hierarchy Disable Enable Storage Hierarchy Enable or Disable Storage Hierarchy Disable Endorsement Enable Enable or Disable Endorsement Hierarchy Hierarchy _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 59...
  • Page 60: H/W Monitor

    PCIe devices in case SR-IOV is supported, otherwise PCIe devices will be assigned to virtual machines in pass-through mode. This applies for all PCIe devices. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 60...
  • Page 61: Platform Management

    This sub menu allows you to change the settings used for related CPU utilization setting. The default configuration for CPU was optimized setting for getting better performance for networking, so it is not recommend to change it. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 61...
  • Page 62: Figure 32: Platform Setup: Platform Management

    Package C state limit Retention) state setting is deep C state support. C6(Retention) state Energy Enable Selects whether BIOS or Operating System _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 62...
  • Page 63: Hardware

    However, those terms are kept consistent with previous products to allow users to navigate more easily. The sub menus are described on the following pages. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 63...
  • Page 64: Hardware Setup: Cpu Configuration

    Figure 33: Hardware Configuration Menu 3.2.3.1 Hardware Setup: CPU Configuration This menu supports configuration of the Xeon D CPU. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 64...
  • Page 65: Figure 34: Chipset: Processor Configuration Menu

    Enable or disable DCU IP Prefetcher Enable feature. DCU IP Prefetcher Disable DCU IP prefetcher is an L1 data cache prefetcher (MSR 1A4h [3]). Table 32: Processor Configuration Menu _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 65...
  • Page 66: Hardware Setup: North Bridge Configuration

    Select Channel Interleaving setting Interleaving DIMM [3-way Interleave] Information [4-way Interleave] Auto [1-way Interleave] Rank Interleaving [2-way Interleave] Select Rank Interleaving setting [4-way Interleave] [8-way Interleave] _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 66...
  • Page 67: Pci Express Port Configuration

    This sub-menu contains settings for the PCIe subsystem. Some menu items are referred to as “PCI” settings. Although the FWA-3260 does not implement a PCI bus, these settings still apply to the platform as PCIe is using the same configuration mechanism as PCI.
  • Page 68: Qpi Configuration

    Select PCIe port bifurcation x8x8 Auto Table 34: Hardware Setup: PCI Subsystem Menu Items 3.2.3.4 QPI Configuration This sub-menu contains settings for the QPI configuration. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 68...
  • Page 69: Figure 37: Hardware Setup: Qpi Configuration

    Allows for Selecting the QPI link frequency 9.6 GB/s Auto Limited Enabled Link0p Enable Enable/disable Link0 Disabled Enabled Link1p Enable Enable/disable Link1 Disabled Table 35: Hardware Setup: QPI configuration Menu Items _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 69...
  • Page 70: Hardware Setup: South Bridge Configuration

    Enable or Disable PCH’s CCRID SMBus Controller Enable/Disable Enable or Disable SMBus CDevice PCH state after Power on Select S0/S5 for ACPI state after a G3 _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 70...
  • Page 71: Figure 39: Hardware Setup: Sata Configuration

    Feature Default Description SATA Port0 Display only SATA Port1 Display only SATA Port2 Display only Show current SATA devices in use on the FWA-3260 SATA Port3 Display only SATA Port4 Display only SATA Port5 Display only SATA Mode AHCI Mode (1) IDE Mode.
  • Page 72: Usb Configuration

    Mode Enabled controller Disabled Manual Table 38: Hardware Setup: USB configuration Menu Items 3.2.3.7 ACPI Setting This menu contains settings for the ACPI configuration. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 72...
  • Page 73: Runtime Error Logging

    Enable lock of legacy resources Resources Disabled Table 39: Hardware Setup: ACPI configuration Menu Items 3.2.3.8 Runtime Error logging This sub-menu contains settings for the Runtime error logging configuration. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 73...
  • Page 74: Server Mgmt

    Table 40: Hardware Setup: Runtime Error logging Menu Items 3.2.4 Server Mgmt The Server Mgmt menu supports configuring BMC related features such as OS Watchdog Timer, etc. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 74...
  • Page 75: Figure 43: Server Mgmt Configuration

    OS Boot Watchdog Timer expires. Reset Policy Not available if OS Boot Watchdog Timer is disabled. Power Down Table 41: Server Mgmt configuration Menu Items _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 75...
  • Page 76: Security Setup

    Users can configure the system boot priority settings via the boot page. The default setting of boot priority of boot option #1 is “UEFI: Built-in EFI Shell”; Users can define the boot priorities based on the application. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 76...
  • Page 77: Figure 44 Boot Configuration

    Sets the system boot order. Force BIOS Option ROM CSM16 Parameters Messages Keep Current CSM Parameters CSM Support Enable the CSM support Table 42 Boot Configuration _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 77...
  • Page 78: Compatibility Support Module (Csm) Configuration

    This item allows a more granular control of UEFI OptionROM execution depending of the Video type of extension device. Legacy Other PCI device Table 43: CSM Configuration Menu _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 78...
  • Page 79: Save & Exit Menu

    3.2.7 Save & Exit Menu The FWA-3260 BIOS allows users to store BIOS configuration results as “User Defaults.” Users can select “Save as User Defaults” to record all changes which had been made in previous pages as the default setting for further use.
  • Page 80: Installing Components

    After that, slide the top cover backwards until the front flange of the top cover disengages with the unit’s face plate: _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 80...
  • Page 81: Reinstalling The Top Cover

    Figure 50: Screws for HDD mounting After removing the top cover, follow the instructions below for 2.5” disk installation: 1) Remove the plastic bag that protects the HDD carrier plate. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 81...
  • Page 82: Figure 51: Hdd Carrier Plate Dampeners

    Make a few turns on each screw only using a PH2 screw driver until the threads start to engage. Then move on to the next screw. When all screws have been inserted, fasten the screws tightly. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 82...
  • Page 83: Figure 53: Screw Insertion And Fastening

    5) Insert the carrier plate mounting screws and start to fix them from the front side (i.e. the side facing the FWA-3260 motherboard). Securely tighten the screws using a PH2 screw driver after having inserted all four screws. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 83...
  • Page 84: Figure 55: Insertion Of The Carrier Into The Chassis

    6) Connect the SATA cable delivered with the unit to the disk as well as the mother board connector. Please make yourself aware of the keying mechanism in the SATA connector before inserting the cable. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 84...
  • Page 85: Figure 56: Sata Cabling

    7) Connect the HDD power cable to the disk. Please make yourself aware of the keying mechanism in the power connector before inserting the cable. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 85...
  • Page 86: Ssd

    An M.2 SSD compliant SSD can be installed at location M3: 1) Make sure the M.2 SSD disk is compliant with the socket and that the mechanical keys match _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 86...
  • Page 87: Memory Installation

    3) Push down the module softly until it is in horizontal position. If the module is correctly seated, the module’s right hand mount hole will align with the threaded standoff in the FWA-3260 motherboard. Insert the M.2 SSD mounting screw and tighten it.
  • Page 88: Figure 63: Opening Dimm Latches

    Figure 64: DIMM key alignment 4) Insert the DIMM from the top using the guide rails on the left and right of the DIMM sockets. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 88...
  • Page 89: Figure 65: Dimm Insertion Into Slide Rails

    Figure 66: Seating the DIMM in the socket 6) In case you want to install another DIMM, repeat steps 1) to 5) accordingly. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 89...
  • Page 90: Firmware Upgrades

    Linux distributions. Documentation on flashrom can also be found there. Start flashrom with the following parameters to update the BIOS on the FWA-3260: -w (BIOS Name) –p internal: laptop=this _is _not_laptop 3.4.2 LAN Bypass LAN Bypass Firmware can be upgraded via the LAN Bypass Software.
  • Page 91: Hdd

    To replace the RTC’s battery located at B1, pull the spring clip securing the battery forward with your finger tip. Please handle with care and do not bend the spring clip. Then extract the battery vertically. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 91...
  • Page 92: Dimms

    To replace a DIMM module, basically extract the DIMM module by pushing the DIMM socket latches outward. As the latches flip completely open, the DIMM module will be automatically extracted from the socket. Pull the DIMM module out vertically. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 92...
  • Page 93: Figure 69: Unlocking And Removing A Dimm

    Figure 69: Unlocking and removing a DIMM To insert a new DIMM please follow the process described in section 3.3.4. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 93...
  • Page 94: Appendix: Connector Pinout And Led Information

    Receive Data (input to FWA-3260) Not connected n.c. Not connected n.c. Table 45: Console connector pin assignment A.2) USB Type A connectors These connectors can be found at position _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 94...
  • Page 95: Figure 71: Stacked Usb Type A Connector

    Right: Link/Active LED Figure 72: RJ45 10/100/1000 Base-T connector A.3.1) Connector Pinout Pin No. Signal Name Description MDI[0]+ Media Dependent Interface[0]+ MDI[0]- Media Dependent Interface[0]- _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 95...
  • Page 96: Table 47: Rj45 10/100/1000 Base-T Connector Pin Assignment

    Table 48: RJ45 connector LED indication Note: Bypass States are only signalled on the traffic LAN ports. Management LAN ports do not have this extra LED colour & signalling. _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 96...
  • Page 97: Bios Post Codes

    Pre-Memory North Bridge initialization (North Bridge module 0x16 specific) Pre-Memory North Bridge initialization (North Bridge module 0x17 specific) Pre-Memory North Bridge initialization (North Bridge module 0x18 specific) _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 97...
  • Page 98 0x3B Post-Memory South Bridge initialization is started Post-Memory South Bridge initialization (South Bridge module 0x3C specific) 0x3D Post-Memory South Bridge initialization (South Bridge module _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 98...
  • Page 99 CPU DXE initialization (CPU module specific) 0x67 CPU DXE initialization (CPU module specific) 0x68 PCI host bridge initialization 0x69 North Bridge DXE initialization is started _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 99...
  • Page 100 PCI Bus Hot Plug Controller Initialization 0x94 PCI Bus Enumeration 0x95 PCI Bus Request Resources 0x96 PCI Bus Assign Resources 0x97 Console Output devices connect 0x98 Console input devices connect _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 100...
  • Page 101 Runtime Set Virtual Address MAP Begin 0xB1 Runtime Set Virtual Address MAP End 0XB2 Legacy Option ROM Initialization 0xB3 System Reset 0XB4 USB hot plug 0xB5 PCI bus hot plug _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 101...
  • Page 102: Table 49: Bios Post Codes

    S3 Resume PPI not Found 0xEA S3 Resume Boot Script Error 0xEB S3 OS Wake Error 0xF0 – 0xF4 unused 0xf8 – 0xFA unused Table 49: BIOS POST Codes _20160302.docx FWA-3260 User Manual v02 Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 102...
  • Page 103: Appendix: Power Supply Specification

    C. APPENDIX: P OWER UPPLY PECIFICATION The FWA-3260 is available with a 250W AC PSU and 300W redundant AC PSU. The specifications for this power supply are listed below. Please consult your Advantech representative reg. other power supply options. Item...
  • Page 104: Appendix: Declaration Of Conformity

    PPENDIX ECLARATION OF ONFORMITY The FWA-3260 has been successfully tested for compliance to the regulations below. Should you need a signed copy of the declaration of conformity or the related test reports, please contact your Advantech representative. This product has passed the CE test for environmental specifications when shielded cables are used for external wiring.
  • Page 105: Appendix: Warranty And Rma

    PPENDIX ARRANTY AND Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.

Table of Contents