Advantech FWA-T011 User Manual
Advantech FWA-T011 User Manual

Advantech FWA-T011 User Manual

Tiny network platform
Hide thumbs Also See for FWA-T011:
Table of Contents

Advertisement

User Manual
FWA-T011
TINY NETWORK PLATFORM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FWA-T011 and is the answer not in the manual?

Questions and answers

Summary of Contents for Advantech FWA-T011

  • Page 1 User Manual FWA-T011 TINY NETWORK PLATFORM...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from your Advantech sales representative. This allows us to process your return more quickly. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container.
  • Page 4 – A complete description of the problem – The exact wording of any error messages For more information about this and other Advantech products, please visit our website at: http://www.advantech.com/ http://www.advantech.com/ePlatform/ For technical support and service, please visit our support website at: http://sup- port.advantech.com.tw/support/...
  • Page 5 RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted Access Area. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advan- tech disclaims all responsibility for the accuracy of any statements contained herein. FWA-T011 User Manual...
  • Page 6 FWA-T011 User Manual...
  • Page 7: Table Of Contents

    WALL MOUNT KIT ..............15 Figure 1.21Wall Mounting Kit............15 Chapter OPERATION ........17 Power up/down ..................18 Booting from network via PXE ..............18 Table 2.1: PXE BIOS Options ........... 18 Figure 2.1 Enable PXE boot_1..........18 FWA-T011 User Manual...
  • Page 8 Table 2.6: Software Definable LED Indication......23 Main Board Connector placement ............23 Figure 2.6 Board Placement Diagram (Top)......23 Figure 2.7 Board Placement Diagram (Bottom) ......24 Table 2.7: FWA-T011 Connector ..........24 Chapter BIOS ........... 25 BIOS Defaults ..................26 3.1.1...
  • Page 9 Table 3.18: CM16 Configuration..........53 3.1.7 SECURITY SETUP..............54 Figure 3.24 Administrator Setup ..........54 3.1.8 SAVE & EXIT MENU ..............55 Figure 3.25Save & Exit Menu ............. 55 Table 3.19: Save & Exit Menu Options........55 Appendix A GLOSSARY ........57 FWA-T011 User Manual...
  • Page 10 FWA-T011 User Manual...
  • Page 11: Chapter 1 Introduction

    Chapter INTRODUCTION...
  • Page 12: Overview

    SKUs. Due to its compact low-profile and fan-less design with mechanical dimension of 152 x 21 x 125 mm (5.9" x 0.8" x 4.9") in Width x Height x Depth, FWA-T011 is an ideal network platform for entry-level network applications. Scenario such as Virtual Private Network(VPN), Content Filtering, Unified Threat Management(UTM), Net- work Security Gateway, and Fire-wall is an ideal deployment example.
  • Page 13: Side View (Left)

    1.2.3 SIDE VIEW (LEFT) Figure 1.3 Side View (LEFT) 1.2.4 SIDE VIEW (RIGHT) Figure 1.4 Side View (RIGHT) FWA-T011 User Manual...
  • Page 14: Top View

    1.2.5 TOP VIEW Figure 1.5 Top View FWA-T011 User Manual...
  • Page 15: Bottom View

    1.2.6 BOTTOM VIEW Figure 1.6 Bottom View FWA-T011 User Manual...
  • Page 16: System Layout & Architecture

    System Layout & Architecture 1.3.1 SYSTEM LAYOUT System layout as below: Figure 1.7 System Layout (Front) Figure 1.8 System Layout (Rear) FWA-T011 User Manual...
  • Page 17: System Architecture

    1.3.2 SYSTEM ARCHITECTURE System Architecture as below: Figure 1.9 System Architecture FWA-T011 User Manual...
  • Page 18: Block Diagram & System Diagram

    Block Diagram & System Diagram 1.4.1 BLOCK DIAGRAM Figure 1.10 Block Diagram FWA-T011 User Manual...
  • Page 19: System Diagram

    System Diagram 1.5.1 SYSTEM DIAGRAM WITH HEATSINK Figure 1.11 System Diagram with Heatsink 1.5.2 SYSTEM DIAGRAM WITHOUT HEATSINK Figure 1.12 System Diagram without Heatsink FWA-T011 User Manual...
  • Page 20: Component Installation

    Component Installation 1.6.1 MEMORY FWA-T011 features 1x 204pin So-DIMM slot reserved for 1600 MHz/1833Mhz Non- ECC DDRIII memory. Maximum capacity is 8G. Install Memory module as schematic diagram below Figure 1.13 Memory Installation Before install memory module, make sure the thermal pad has been attached.
  • Page 21: Storage

    1.6.2 STORAGE FWA-T011 features 1x M.2 2280 NGFF slot reserved for M.2 SATA3 SSD. Install storage as schematic diagram below Figure 1.15 Storage Installation Make sure the specification of SSD storage module that is going to inserted is M.2 2280 SATA3. The storage socket is "M-Key" type socket. It is compatible with the SSD storage module that is using "M-Key"...
  • Page 22: Wifi (Optional)

    1.6.3 WIFI (OPTIONAL) FWA-T011 features 1x M.2 2230 NGFF slot reserved for Wifi module. Install Wifi module as schematic diagram below Figure 1.17 Wifi Module Installation (Optional) Before install Wifi module, make sure the thermal pad has been attached Figure 1.18 Example of Wifi Module Installation...
  • Page 23: 4G Lte (Optional)

    1.6.4 3G/4G LTE (OPTIONAL) FWA-T011 features 1x M.2 3042 NGFF slot reserved for 3G/4G LTE module. Install 3G/4G LTE module as schematic diagram below Figure 1.19 3G/4G LTE Module Installation(Optional) Before install 3G/4G LTE module, make sure the thermal pad has been attached Figure 1.20 Example of 3G/4G LTE Module Installation...
  • Page 24: Operation Environment

    Operating temperature 0 ~ 40 °C (32 ~ 104 °F)  Non-operating Temperature -20 ~ 80° C (-4 ~ 167° F)  Relative humidity 95% @ 40° C (non-condensing)  Storage temperature -40 ~ 85° C (-40 ~ 185° F) FWA-T011 User Manual...
  • Page 25: Mounting Instructions

    Mounting Instructions 1.8.1 WALL MOUNT KIT FWA-T011 comes with the wall mount kit. Install wall mount kit as schematic diagram below Figure 1.21 Wall Mounting Kit FWA-T011 User Manual...
  • Page 26 FWA-T011 User Manual...
  • Page 27: Chapter 2 Operation

    Chapter OPERATION...
  • Page 28: Power Up/Down

     Press and hold the Power button for more than 4 seconds to force FWA-T011 to enter standby mode. This method forces FWA-T011 to enter standby mode without properly exiting applications and the OS. If an application stops responding, you can use this method to force a shutdown.
  • Page 29: Figure 2.2 Enable Pxe Boot.2

    When set Network Stack is enabled, and then go to item of " BIOS/ Post & Boot -> CSM Parameters -> Network" to enable PXE ROM function, set it as "UEFI" (IPV4 PXE) function . Figure 2.2 Enable PXE boot.2 FWA-T011 User Manual...
  • Page 30: Figure 2.3 Enable Pxe Boot_3

    PXE server, it will show "No Media Pres- ent.." Figure 2.3 Enable PXE boot_3 User may re-login in BIOS, choose BIOS/ boot item, it will has "Network Device BBS Priorities" item and set UEFI PXE LAN boot sequence priority. Figure 2.4 Enable PXE boot_4 FWA-T011 User Manual...
  • Page 31: Figure 2.5 Enable Pxe Boot_5

    Setting_up_a_server_for_PXE_network_booting. Warning! Please note that it is recommended to setup a separate network / sub- net for network booting as the DHCP required for PXE booting may con- flict with existing DHCP servers in your network. FWA-T011 User Manual...
  • Page 32: Power Led Indication

    If the card is in a state wherein it is possible that radio can begin transmitting without the system user perform- ing any action, this LED should remain ON. FWA-T011 User Manual...
  • Page 33: Software Definable Led Indication

    LED Behavior (Green/Red) TBD by Customer Turn off TBD by Customer Turn on (Red) TBD by Customer Turn on (Green) TBD by Customer Turn on (Red and Green) Main Board Connector placement Figure 2.6 Board Placement Diagram (Top) FWA-T011 User Manual...
  • Page 34: Figure 2.7 Board Placement Diagram (Bottom)

    Figure 2.7 Board Placement Diagram (Bottom) Table 2.7: FWA-T011 Connector Location Description DCIN1 Power Connector (+12V to MB) COM1 Console Connector LAN1 LAN Connector LAN2 LAN Connector LAN3 LAN Connector LAN4 LAN Connector HDMI1 HDMI Connector M2_1 M.2 KEY E Connector (WIFI) M2_2 M.2 KEY B Connector (LTE)
  • Page 35: Chapter 3 Bios

    Chapter BIOS...
  • Page 36: Bios Setup Menu

    FWA-T011 BIOS is based on AMI's APTIO BIOS and compliant to the UEFI, SMBIOS and ACPI specifications. The BIOS performs probing, initialization and configuration of the FWA-T011 and ini- tializes the OS boot process at the end of POST (Power-On-Self-Test).
  • Page 37: Figure 3.2 Bios Setup Screen Organization

    Auxiliary text providing information about the selected setup item is displayed in the top right corner. Figure 3.2 BIOS Setup Screen Organization FWA-T011 User Manual...
  • Page 38: Main Setup Menu

    BIOS Setup. After a successful check or if password pro- tection has not been enabled, users will see the Main Setup screen shown below. Users can always return to the Main setup screen by selecting the Main tab. Figure 3.3 BIOS Setup Main screen FWA-T011 User Manual...
  • Page 39: Table 3.1: Bios Setup: Main Menu

    Please note that system time and date are set during manufacturing process accord- ing to factory's local time zone. You may need to update system time to reflect the desired time zone when you receive the unit. FWA-T011 User Manual...
  • Page 40: Platform Setup Menu

    3.1.4 PLATFORM SETUP MENU Select the Platform tab from the FWA-T011 setup screen to enter the Platform Setup screen. Users can select any of the items in the left frame of the screen, such as the Trusted Computing Configuration, to go to the sub menu for that item. Users can dis- play a Platform BIOS Setup option by highlighting it using the <Arrow>...
  • Page 41: Figure 3.5 Platform Setup_Console Redirection Menu

    Serial Console This sub menu allows you to change the settings used for the serial console. Note that the serial console is always using COM1 which is connected to the front panel. Figure 3.5 Platform Setup_Console Redirection Menu FWA-T011 User Manual...
  • Page 42: Table 3.2: Platform Setup: Com0 Console Redirection Menu Items

    This defines how long console redirection will be active: "BootLoader" means that legacy console redirection is disabled Redirection after BIOS Always Enable / BootLoader before booting into a Legacy OS. "Always Enable" means Legacy console Redirection is enabled permanently. FWA-T011 User Manual...
  • Page 43: Figure 3.6 Platform Setup_Usb Configuration Menu

    3.1.4.2 USB Configuration This sub menu allows you to change the settings used for USB and to get an over- view of the USB devices detected by the BIOS. Figure 3.6 Platform Setup_USB Configuration Menu FWA-T011 User Manual...
  • Page 44: Table 3.3: Usb Configuration Menu

    Device Reset time-out 10sec / 20sec / 30sec / 40sec Reset hard- Maximum time the device ware will take before it properly Device power-up Auto delay reports itself to the Host delay Manual Controller. Device power-up delay FWA-T011 User Manual...
  • Page 45: Figure 3.7 Platform Setup_Trusted Computing

    Is displayed when TPM support Support Turned Off Display Only is disabled Current Status TPM State Display Only Shows TPM Enablement Status information TPM Active State Display Only Shows TPM Activation Status TPM Owner Display Only Shows Current TPM Owner FWA-T011 User Manual...
  • Page 46: Figure 3.8 Platform Setup_Trusted Computing With Tpm2.0

    Trusted Computing with TPM module installed When system with TPM2.0 module installed, and the BIOS will auto detect it and the related setting will be shown in the BIOS setup menu as below. Figure 3.8 Platform Setup_Trusted Computing with TPM2.0 FWA-T011 User Manual...
  • Page 47: Table 3.5: Trusted Computing Menu With Tpm2.0

    TPM 1.2 or TPM2.0. Choose TPM 2.0 HID return value. We suggest to use MSFT0101 for Win- MSFT0101 dows and Linux kernel TPM 2.0 HID PNP0C31 version 4.4 and to use PNP0C31 for Linux kernel with previous version from FWA-T011 User Manual...
  • Page 48: Figure 3.9 Platform Setup_Trusted Computing With Tpm1.2

    Security Device. NOTE: Your Computer will reboot Pending operation None during restart in order to change State of Security Device. Auto will support both or set Device Select Auto the support for the TPM 1.2 or TPM2.0. FWA-T011 User Manual...
  • Page 49: Figure 3.10Platform Setup_Hw Monitor

    3.1.4.5 H/W Monitor This sub menu allows you to see all the H/W monitor items detected by the BIOS for well know the current system health status. Figure 3.10 Platform Setup_HW monitor FWA-T011 User Manual...
  • Page 50: Figure 3.11Platform Setup_Virtualization

    Access / Options Description Enable/Disable Intel Virtu- Enable Intel Virtualization alization Technology , take Disable effect after reboot None Enable/disable Intel Virtu- Enable alization Technology for Intel VT-d Disable Directed I/O (VT-d) by reporting the I/O device FWA-T011 User Manual...
  • Page 51: Figure 3.12Platform Setup_Platform Management

    This sub menu allows you to change the settings used for related CPU utilization set- ting. The default configuration for CPU was optimized setting for getting better perfor- mance for networking, so it is not recommend to change it. Figure 3.12 Platform Setup_Platform Management FWA-T011 User Manual...
  • Page 52: Table 3.8: Platform Management Menu

    Disable Recommended to be enabled. Maximum Package C State C2 state support. The "waking-up Max Package C State C1 state time" will be longer if Pack- C0 state age C state setting is deep C state support. FWA-T011 User Manual...
  • Page 53: Hardware Setup Menu

    However, those terms are kept consistent with previous products to allow users to navigate more eas- ily. The sub menus are described on the following pages. Figure 3.13 Hardware Configuration Menu FWA-T011 User Manual...
  • Page 54: Figure 3.14Chipset_Processor Configuration Menu

    Displays information on Intel VT-x Technology Display only information the processor installed L1 code Cache L2 Cache L3 Cache Intel HT Technology Enables Hyper Thread- Enable ing (Software Method to None Hyper-threading Disable enable/disable logical processor threads. FWA-T011 User Manual...
  • Page 55: Figure 3.15Northbridge Configuration Menu

    This menu allows the configuration of the memory controller and related features of the SoC. Figure 3.15 NorthBridge Configuration Menu Table 3.10: Northbridge Configuration Menu Group Setup item Access / Options Description Total Memory Displays information on the DIMM Information Display only processor installed Memory Frequency FWA-T011 User Manual...
  • Page 56: Figure 3.16Hardware Setup_Pci Subsystem

    This sub-menu contains settings for the PCIe subsystem. Some menu items are referred to as "PCI" settings. Although the FWA-T011 does not implement a PCI bus, these settings still apply to the platform as PCIe is using the same configuration mechanism as PCI.
  • Page 57: Figure 3.17Hardware Setup_South Bridge Configuration

    Select sub-menu. USB Configuration Select sub-menu. ACPI Settings Select sub-menu. Enable or Disable SMBus SMBus Controller Enable/Disable Device S0 State Select S0,S5 and Last state after G3 S5 State state for ACPI state after a Last State FWA-T011 User Manual...
  • Page 58: Figure 3.18Hardware Setup_Sata Configuration

    Figure 3.18 Hardware Setup_SATA configuration Table 3.13: Hardware Setup: SATA configuration Menu Items Feature Default Description SATA Port0 Display only Show current SATA devices in use on the FWA-T011 SATA Port1 Display only SATA Mode AHCI (1) AHCI Mode. Enabled...
  • Page 59: Figure 3.19Hardware Setup_Usb Configuration

    Table 3.14: Hardware Setup: USB configuration Menu Items Group Setup item Access / Options Description Enable/Disable this USB Enabled USB Port #0 Disable Physical Connector Disabled (physical port) USB Configuration Enable/Disable this USB Enabled USB Port #3 Disable Physical Connector Disabled (physical port) FWA-T011 User Manual...
  • Page 60: Figure 3.20Hardware Setup_Acpi Configuration

    None Select the highest ACPI Suspend Disabled sleep state the system will ACPI Sleep State S1 (CPU Stop Clock) enter when the SUS- PEND button is pressed. Enabled Enable lock of legacy Lock Legacy Resources Disabled resources FWA-T011 User Manual...
  • Page 61: Setup Post & Boot Menu

    Enables or disables boot via Network Network Stack Disabled (PXE) Boot Option Priority User Defined Sets the system boot order. Force BIOS CSM16 Parameters Option ROM Messages Keep Current CSM Parameters CSM Support Enable the CSM support FWA-T011 User Manual...
  • Page 62: Figure 3.22Post & Boot Setup_Csm Configuration Menu

    UEFI compliant None UEFI Only Option ROMs Network This item allows a more Do not launch granular control of Option- Storage UEFI ROM execution depending Video Legacy of the type of extension Other PCI device ROM device. FWA-T011 User Manual...
  • Page 63: Figure 3.23Csm16 Configuration

    Upon Request GateA20 Active do not allow disabling Always GA20; this option is use- None ful when any RT code is executed above 1MB Force BIOS Set display mode for Option ROM Messages Keep Current Option ROM FWA-T011 User Manual...
  • Page 64: Security Setup

    If set the "Password Check" is [Always], then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights.  The password length must be in the following range: – Minimum length: 3 – Maximum length: 20 FWA-T011 User Manual...
  • Page 65: Save & Exit Menu

    3.1.8 SAVE & EXIT MENU The FWA-T011 BIOS allows users to store BIOS configuration results as "User Defaults." Users can select "Save as User Defaults" to record all changes which had been made in previous pages as the default setting for further use.
  • Page 66 FWA-T011 User Manual...
  • Page 67 Appendix GLOSSARY...
  • Page 68 Registered DIMM RMCP Remote Management Control Protocol Receive Serial Attached SCSI SATA Serial Advanced Technology Attachment SCSI Small Computer System Interface Sensor Data Record SerDes Serializer/Deserializer Serial Over LAN Solid State Disk Software Trusted Platform Module Transmit FWA-T011 User Manual...
  • Page 69 UDIMM Unbuffered DIMM UHCI Universal Host Controller Interface Universal Serial Bus FWA-T011 User Manual...
  • Page 70 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. Copyright © 2018 Advantech Co., Ltd.

Table of Contents