Figure 2.4-10
GUI-based OS (Debian) through iKVM
2.4.4
Rackmount Kit Installation
Rack mount kit installation instruction: Align the holes on the rack mount bracket with the holes on the
sides of FWA-3051. Insert screws through the holes in the rack mount bracket and into the
corresponding holes on appliance.
Use a screwdriver or power drill with the appropriate bit to tighten the screws. Be careful not to
overtighten, as this can damage the appliance.
2 Post rack:
M4 Screws x6
Copyright 2024 Advantech Co. Ltd. All rights reserved.
Page 24