Installation - Advantech FWA-1330B Startup Manual

Installation

Setup
1. Unpack the box and take FWA-1330 out of it. Unfasten
the four screws indicated with the red arrows in the
below figure, then remove the top cover.
Installing the mSATA & Memory
1. Take one memory card and push it into DIMM slot as
shown in the second figure below, then press it to
make it hooked firmly (the third figure below shows the
position of the card hooks).
2 FWA-1330B Startup Manual
Installation (Cont.)
2. Take one mSATA and push it into mSATA slot (Mini-
PCIE connector, location named MSATA1) in the
direction as shown in the below.
3. Take one Nylok screw from the accessory box and
insert it into the position marked by a red circle in the
below figure to fix mSATA.