Table of Contents
Advertisement
2.4.5 Powering On
Caution!
Before connecting the FWA-3051 to the power outlet, ensure that the power rating of
the outlet matched that of the FWA-3051' PSU. Also, verify the primary circuit and all
power distribution in not overloaded. Inrush current and steady state power
specifications for the FWA-3051 can be found at the label under the bottom of the
unit.
Connect the 2 power cord to the Power Supply (refer to
rear site as the VGA port.
The unit will automatically power on after power is supplied. The green LED on the front panel should be
lit as the unit is under power.
Please refer to
Section 3.2.1
Sections
2.4.1 to 2.4.3
provide guidance on OS installation based on specific environmental constraints.
Please select the method that best suits your needs.
2.5 Getting Help: Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find the latest
information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service center for technical
support if you need additional assistance. Worldwide contact information can be found on
www.advantech.com. Please have the following information ready before you call:
•
Product name and serial number
•
Description of your peripheral attachments
•
Description of firmware and software versions installed on the product
•
A complete description of the problem
•
The exact wording of any error messages
3. For more information please contact regional sales or
Copyright 2024 Advantech Co. Ltd. All rights reserved.
Figure 2.4-12
Location of the power input ports
for the location of front and rear panel elements.
Section 3.4.9
for details) located at the same
visit
website
P
S
RODUCT
PECIFICATION
Page 28
Advertisement
Table of Contents
