How To Upgrade The Firmware Via Bmc Web (Node Explorer); How To Upgrade The Firmware Via Ipmi; Dimms Population; On Board Nic's Act Led Behavior - Advantech FWA-3051 User Manual

Figure 4.4-3 BIOS Setup Menu
PS: Set "Configuration Address" -> "DHCP" if obtain IP address from DHCP server

4.4.2 How to upgrade the firmware via BMC WEB (Node Explorer)?

For more details, please refer to "Node Explorer User Manual (Section 2 & 3.4.4)".
https://www.advantech.com/en/support/details/manual?id=1-1MU1KB1

4.4.3 How to upgrade the firmware via IPMI?

For more details, please refer to "Common IPMI User Manual (Section 3)".
https://www.advantech.com/zh-tw/support/details/manual?id=1-2FZXUHT

4.5 DIMMs Population

Always insert memories in DIMM A first. After all the DIMM A slots are occupied, and then DIMM B
can be inserted memories and then DIMM C to DIMM D accordingly, please refer to Section 3.2.4.

4.6 On board NIC's ACT LED behavior

FWA-3051 on board was designed with 4 Gbe NICs came from E823-C of SOC, and the NIC's ACT LED
with some conditions to trigger it, the details describe as below:
Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 65