Sfp Installation And Connection; Figure 6. Triangle Mark; Figure 7. Lc Connector To The Transceiver - Advantech B+B SMARTWORX ESWGP512 4SFP T User Manual

SFP INSTALLATION AND CONNECTION

To connect the transceiver and fiber cable, follow the steps below. The SFP port is not proprietary. Any
MSA-compliant 100Mbps fiber SFP can be installed in the port. (Note: SFP modules typically
terminate with an LC fiber connector)
First, insert the SFP transceiver into the SFP module cage. Notice that the triangle mark is at the bottom
of the module.

Figure 6. Triangle Mark

Next, insert the fiber cable into the transceiver.

Figure 7. LC Connector to the Transceiver

Last, remove the SFP; gently pull out of the cage manually.
17