4.4 Firmware Upgrades
The FWA-3051 is equipped with BMC (Baseboard Management Controller) functionality. Firmware
upgrades can be performed through BMC. First, you need to set the BMC IP address. The firmware
can be upgraded using either the BMC Web interface or the ipmitool utility. Here are the
instructions:
4.4.1 How to access the BMC Web (Node Explorer)?
4.4.1.1 Network Configuration
Configure the BMC's IP as desired (by default, it is set as static address 0.0.0.0).
First, please refer to
Section 3.2
introduction and Figure 3.3 system front panel to confirm the
location of the IPMI port.
1. During the boot process, press DEL (or F2) into BIOS, select "Server Mgmt page".
Figure 4.4-1
BIOS Setup Menu
Copyright
2024
Advantech Co. Ltd. All rights reserved.