2.2
Booting from network via PXE
To boot an OS via network, please make sure the following BIOS options in the Advanced: Network Stack
Configuration Menu are configured properly:
Network Stack
IPv4 PXE Support
Below are the steps to enable UEFI PXE boot.
1. It needs to set BIOS/ Advanced-> Network Stack Configuration-> Network Stack as enabled (default setting
is disabled) & UEFI PXE Support as enabled
Copyright
2014
Advantech Co. Ltd. All rights reserved.
Enabled
Enables the UEFI Network Stack.
Enabled
Enabled if PXE booting in an IPv4 network;
Disabled
disabled otherwise
Table 1: PXE BIOS Options