Advantech FWA-3051 User Manual page 34

1. Double check that the DIMMs be installed match the requirements of
you follow the DIMM population rules given in that section.
2. Open the latches on the left and right sides of the DIMMs by turning it outwards as indicated by
the arrows below.
3. Select DIMM orientation so that the keys in the DIMM module and socket match.
4. Insert the DIMM from the top using the guide rails on the left and right of the DIMM sockets.
5. Put your thumbs near the right and left end of the DIMM and press down the DIMM evenly until
the white latches fully close with a click.
6. In case you want to install another DIMM, repeat steps 1 to 5 accordingly.
Copyright 2024 Advantech Co. Ltd. All rights reserved.
Figure 3.2-7 Opening DIMM Latches
Figure 3.2-8 DIMM Key Alignment
Figure 3.2-9 DIMM Insertion into Slide Rails
Figure 3.2-10 Seating the DIMM in the Socket
Section 4.5 and make sure
Page 34