Power Supply Specification - Advantech FWA-3051 User Manual

5.4 Power Supply Specification

The FWA-3051 is available with different power supply options. The specifications for the available
power supplies on the standard product SKUs are listed below. Please consult your Advantech
representative for other power supply options.
Table 5.4-1 300W AC Power Supply Specification
Item
Input Voltage
Rating
Input Current
Inrush Current
Efficiency
MTBF
Environment
Copyright 2024 Advantech Co. Ltd. All rights reserved.
Specification
Rated: 100Vrms-240Vrms AC @ 50/60Hz
Min/Max: 90Vrms-264V rms AC @ 47Hz-63Hz
300W
A
≤ 3.5
100Vac ~ 240Vac, 4A load
AC line inrush current shall not exceed 55A
peak
88% @ 100% of maximum load @ 230V
≥
92% @ 50% of maximum load @ 230V
≥
100,000 hours at 75% load and 40C
Temperature:
- Operation: 0-50°C
- Non-Operation: -40-70°C
Humidity:
- Operation: ~ 85% relative humidity
(non-condensing)
Non-Operation: : ~ 90% relative
-
humidity (non-condensing)
Altitude:
Operation : sea level to 5000m
-
Vibration:
Non-operating Sine sweep: 5Hz to
-
500Hz @ 0.5gRMS at 0.5 octave/min;
dwell 15 min at each of 3 resonant
points; Random profile: 5Hz @
0.01g²/Hz to 20Hz @ 0.02g²/Hz (slope
up); 20Hz to 500Hz @ 0.02g²/Hz (flat);
Input acceleration = 3.13gRMS; 10 min.
per axis for 3 axis on all samples
Comment / Conditions
calculated by Bell core
RPP
Page 69